Examples of 'set the flash' in a sentence
Meaning of "set the flash"
Set the flash: In photography, setting the flash involves adjusting the settings on a camera to control the intensity and timing of the artificial light emitted by the flash unit. This is done to properly illuminate the subject being photographed and achieve the desired lighting effect in the final image
How to use "set the flash" in a sentence
Basic
Advanced
set the flash
Set the flash exposure bracketing amount.
You can set the flash mode.
Set the flash exposure compensation amount.
Press the or button to set the flash output.
Set the flash mode by repeatedly pressing.
Press the or button to set the flash exposure compensation amount.
Set the flash unit parameters as desired.
Setting flash You can set the flash time manually.
Set the flash unit parameters.
To deactivate the stroboscope function, set the flash rate to.
You can set the flash as follows.
In the shooting mode, select the flash control mark and set the flash compensation value.
Set the flash light to force.
Flash Mode - Allows you to set the flash mode.
Set the flash brightness to its maximum level.
See also
Press the + button or - button to set the flash output amount.
Set the flash just the way you like it.
When the device is recording, press this button to set the flash light status auto / off / on.
Set the flash to something other than flash off mode.
Xfunlife . ru . date a cable bluetooth data the accumulator bluetooth set the flash card adapter irda multisim -.
You can also set the flash exposure in advance.
Press the button to which [ FEL Lock toggle ] is registered, and set the flash amount.
The camera will set the flash off and focus to infinity.
When using A ( auto ) mode and other shooting modes, you can set the flash mode.
Set the flash mode by turning the control dial while holding down.
When “ Always on ” is set the flash is used for every shot.
Set the flash to this mode when you do not want to use the flash.
In the Mode details area, set the flash amount, flash interval.
You can set the flash mode even when no flash is attached to the camera.
Set the Master flash to manual mode and set the flash output to approximately 1/16.
Set the flash amount in the Mode.
In the Mode details area, set the flash amount, flash interval in " Hz " eg.
Set the flash device to TTL or manual flash mode.
Flash Mode - Allows you to set the flash to On, Off, or Auto.
Set the flash unit to HSS.
Alternatively, set the flash frequency by means of the menu.
Set the Flash mode of the Slave.
Flash alerts - Enable to set the flash to blink for incoming calls and notifications.
Set the Flash light to Auto.
Flash [ ], Allow you to set the flash when you take a photo in dark place.
Set the flash unit to the operating mode!
For example, you can set the Flash document frame rate to 30 fps and the video.
To set the flash level properly, we recommend you to do a trial recording.
How to set the flash mode in the devices Sonoff.
Set the flash and take a picture of the rail, for example.
You can set the flash mode by selecting [ ] on the Camera menu.
Set the flash device to E-TTL or manual flash.
Set the flash unit to mode!
Set the flash mode to! p.
Set the flash frequency with the control “ Stroboflash Controller ” 9.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Flash
Show more
The name will flash on the screen
Flash has found one of my party favors
You will just flash the mirror
