Examples of 'set the master' in a sentence
Meaning of "set the master"
set the master: In certain contexts, this could refer to establishing or adjusting settings or controls to a predefined standard or reference point
How to use "set the master" in a sentence
Basic
Advanced
set the master
Set the master power switch to the on.
MASTER DIM Used to set the master dimmer while used as master.
Set the master volume and select a preview.
Commenting on yourself, set the master password.
Used to set the master output to mono or stereo.
To prevent switching noise, set the master control.
Set the master unit to one of the following modes.
Pull that hose, set the master stream on top.
Set the master device and each slave device to the same transmission channel.
Before turning on the power, set the Master output control to the off position.
Set the master mode for the first unit and select one of the shows.
Use this Level-Control to set the Master Volume.
Prompt proposing to set the master password is displayed when storing a password in compression profile.
To ‘ silently ' record or practice via headphones, set the Master Volume to zero.
Set the Master output from your mixer to maximum.
See also
If there is a noticeable loss of engine power, Set the Master Control lever 1.
Set the master unit to operate in either an auto program or Sound mode.
Prior to switching on, set the master controls 14.
Set the master unit to operate in either Automatic or Sound mode.
To record ‘ silently ', simply set the master volume to zero.
Set the master device to the desired mode all except Addr and SLAU.
To avoid a strong inrush bump, at first set the master fader ( 15 ) to minimum position.
Set the Master Level controls fully counterclockwise.
After you have set the Master amplifier, connect it to the Center Unit.
Set the master fixture to operate in either automatic or sound-active mode ; please see.
Adarsh, set the master arm to " on.
Set the master unit indoor unit having the right to select the cooling / heating operation mode.
Prior to switching on, set the master control to “ 0 ” to prevent switching noise.
N Set the Master Control lever to suit the engine temperature.
Prior to switching on, set the master faders ( 19 ) to zero to prevent switching noise.
N Set the Master Control lever to n the starting throttle position.
Prior to switching on, set the master fader ( 8 ) to minimum to prevent switching noise.
Set the master volume with the VALUE 2 knob.
Set the master to 1MSL channel mode see previous chapter.
Set the master to operate in either Auto mode or Sound-Active mode.
Set the master unit to operate in either Automatic or Sound-Active mode.
Set the master power switch to the O ( off ) position before cleaning or making repairs.
Set the master volume to minimum by turning VOLUME a knob counter-clockwise until it stops.
Set the Master Fader fully clockwise, listening carefully for any hint of feedback or overload.
Now set the Master device to one of the stand-alone modes Auto or Sound Control.
Set the master product to operate in Stand-Alone mode or with the IRC-6.
Set the master power switch to the I ( on ) position and close the grille panel.
Set the master volume control knob a to its minimum, turn the power on Fig . 2.
Set the master to 1MSL or 4MSL channel mode see previous chapter.
Set the Master Volume at approximately 9 o'clock.
Set the master control to approx . 2/3 of its maximum position.
Set the Master knob to no more than 70.
Set the Master volume control at the 12 o'clock position.
Set the Master flash to manual mode and set the flash output to approximately 1/16.
Set the master unit to operate in either, Automatic, Laser Sky, or Sound mode, as.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Master
Show more
An overawed master from an obscure comprehensive school
The softener is shipped in one master carton
Here the master takes his meat
