Examples of 'set the sensitivity' in a sentence
Meaning of "set the sensitivity"
Set the sensitivity: Adjusting or defining the level of sensitivity or reactivity of a system, device, or tool to certain stimuli or inputs
How to use "set the sensitivity" in a sentence
Basic
Advanced
set the sensitivity
Set the sensitivity of the air quality sensor.
Turn in a clockwise direction to set the sensitivity to your requirements.
Simply set the sensitivity to your desired level.
Sensitivity and here you can set the sensitivity of the motion.
Set the sensitivity using the regulation control bar.
Press the Öbutton to set the sensitivity time.
Set the sensitivity of emergency recording triggered by the sensor.
When turning on the VOX mode you will set the sensitivity.
Here you can set the sensitivity of motion detection.
Move the joystick 8 up or right or down or left to set the sensitivity.
Set the sensitivity by briefly pressing the filtration speed setting button.
Sound Sense Used to set the sensitivity of the internal microphone.
Set the sensitivity to a higher lever in order to detect deeply buried targets.
Alternatively, set the sensitivity on the menu.
Set the sensitivity of the air quality sensor People with certain health problems for example.
See also
Scroll detent force switch - set the sensitivity of your weapon selection.
Set the Sensitivity control to maximum.
You can use the Wipe sensor function to set the sensitivity of the rain / light sensor.
You can set the sensitivity of the sensor individually with switch.
Select the VCA Type, draw the detection region and set the sensitivity.
For this reason set the sensitivity carefully and not too high.
For zones with the zone property “ shock sensor ”, set the sensitivity.
Here you can set the sensitivity of the motion detection for each camera.
By doing the same, but turning the rear dial, you manually set the sensitivity.
You can set the sensitivity of the microphone via the wireless remote control.
Press SENS and then + or - to set the sensitivity.
IS is to set the sensitivity of comparing two different images.
You can make anyone sound like Chernobyl. Set the sensitivity to ten, Easy.
TS is to set the sensitivity regarding how long one object stays in the detection.
After setting the aperture, set the sensitivity ( ISO ) and speed.
Optional Set the Sensitivity and Threshold sliders to the desired positions.
Use the [ DOWN & UP ] buttons to set the sensitivity level.
How to Set the Sensitivity and SleepTime.
Set the sensitivity of the device at first to Level 1.
Tap the cameras to set the sensitivity to Off, Low or High.
Set the sensitivity to ten, you can make anyone sound like Chernobyl.
You have set the sensitivity TOO HIGH.
To set the sensitivity of a message, open the Properties dialog box for a message.
When this happens, set the sensitivity switch to decreased sensitivity.
Set the sensitivity of Auto-Scan feature.
It is recommended to set the sensitivity to 20dB and not to go below 15dB.
Method: - Set the sensitivity control 2 to the most sensitive extreme right, turn clockwise.
If you want to set the sensitivity for another channel, proceed as described above.
Set the sensitivity to the reading plus 2 with the knob TRACK / TRIM 4.
Users can set the sensitivity of the microphone see page 7.
Set the sensitivity of impact detection from “ Settings-GSensor ”.
The cooker, set the sensitivity level manually see section 6.
Set the sensitivity control to the minimum position ( 3.5 ) by turning anticlockwise.
Here you can set the sensitivity of the motion detection 1 lowest sensitivity, 5 highest sensitivity.
Set the sensitivity according to the level of radiation HF35C and HF38B only.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Sensitivity
Show more
Refer to the movement sensitivity adjustment section
Sensitivity analysis and fair value disclosures
Set the microphone sensitivity to a higher level
