Examples of 'set the torque' in a sentence
Meaning of "set the torque"
set the torque: This phrase relates to adjusting the amount of rotational force applied to an object, typically within a mechanical or engineering context
How to use "set the torque" in a sentence
Basic
Advanced
set the torque
Set the torque adjusting collar for.
Use a torque wrench to set the torque.
Set the torque selector collars to the drill position.
How do you set the torque.
Set the torque adjustment ring to the drilling position.
This tool is fitted with a collar to set the torque for tightening screws.
Set the torque selector switch to the desired torque.
This tool is equipped with a collar to set the torque for tightening screws.
Set the torque wrench to the minimum torque before putting it away in its box.
The tool must be at a standstill when you set the torque with the setting ring.
Set the torque selector collar to the proper position and set the speed to low.
Where possible, use a scrap piece of material to set the torque.
Set the torque adjusting collar for maximum torque and set the speed selector.
For drilling in masonry, set the torque control collar to the position.
To set the torque align the desired setting with the arrow on the tool housing.
See also
For serial screwdriving applications, set the torque slide to this value.
Set the torque selector setting ring 3 to the required torque.
This tool is fitted with a collar to set the torque for tightening screws . u.
Before, set the torque according to the specifications of the rim manufacturer.
Smaller screws / bits can be damaged if you set the torque or rotational speed too high.
Set the torque adjustment collar ( d ) to the appropriate number setting for the torque desired.
Torque selection ring / drill setting You can set the torque using the torque selection ring.
Set the torque adjustment collar Figure 5.
For drilling in masonry, set the torque adjustment collar 8.
Set the torque adjustment collar ( d ) to the desired setting.
For screwdriving proceed as follows, Set the torque adjustment to position “ 1 ”.
Set the torque adjustment collar ( e ) to the drill symbol.
For screwdriving, set the torque selector to the desired setting.
Set the torque regulator knob to 4 ( maximum setting ) to remove nuts.
To operate, set the torque adjustment collar to the position marked 1.
Set the torque with key SW 19 as shown in illustration.
Set the torque selector to the lowest torque setting . PIC 6.
Set the torque adjustment ring ( 3 ) to the desired.
Set the torque adjustment collar ( 2 ) against this symbol to choose drilling in metal, wood, etc.
Set the torque setting ring 1 to the “ Drilling ” symbol.
Set the torque adjustment collar ( Fig . 3 ) to the desired setting.
Set the torque adjustment collar FIG . 4.
You'll also be interested in:
Examples of using Torque
Show more
The resulting torque introduces the rotation
Torque for terminal box cover screws
Low level inducement torque reduction scheme
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
