Examples of 'set this value' in a sentence
Meaning of "set this value"
set this value - means to assign or define a specific numerical or qualitative measure to a particular variable or parameter. Example: To adjust the screen brightness, simply go to the settings and set this value to your desired level
How to use "set this value" in a sentence
Basic
Advanced
set this value
You can set this value manually.
There is no way to set this value.
Set this value for each one.
It is recommended you set this value rather high.
Set this value to zero to skip the segment.
Make sure not to set this value too high.
Set this value if thermal solar panels are installed.
Is recommended to set this value.
Set this value in case an auxililary boiler is used.
Enter the desired compensating value and set this value by pressing.
Set this value in case an auxiliary boiler is used.
Click OK again to set this value.
Set this value and inactivate this variable.
How are we just able to set this value of x?
Set this value to the minimum number of passes needed.
See also
It is recommended that you set this value to 8 characters.
Set this value to zero to skip the spin step.
To move up the screen, set this value larger.
Set this value to true.
To display the alert message, set this value to on.
You can set this value to a time value as well.
It is recommended that you set this value to 2 days.
Set this value according to the subnet mask of the subnet.
To disable auxiliary heat for this segment, set this value to zero.
Set this value long enough to allow full motor magnetization.
For standard applications, set this value according to nominal frequency of the motor.
Set this value to the maximum number of cutting tools on your machine.
To avoid this pop up message, set this value to False.
Set this value on the depth stop and tighten the handle.
If the network has no gateway, set this value to an unused IP address.
When set this value will be used instead of the global value.
However, if you wish to print in a very large format, set this value to Accurate.
It is safe to set this value to a much larger value than work mem.
If switching is allowed under all circumstances, set this value to 0.
We can not set this value any lower as it would then be impossible to measure.
To move the screen down ( or to the left ), set this value smaller.
You can set this value interactively by moving the square inside the preview.
Volume-density operation is not used, set this value to the same as the Vehicle Extension.
Set this value if using the scripted object you need only a text to be displayed ;.
While viewing the Odometer value, press and hold START / SPLIT to set this value back to 0.
You may set this value to any multiple of 2.
In our case, we will set this value to 1.
When you set this value to zero again, the activity will not be repeated.
For most organizations, set this value to 24 passwords.
We set this value to be the new value, and we mark change as True.
For most organizations, set this value to 42 days.
If you set this value to 0, Nagios will start sending out notifications immediately.
To move the screen up ( or to the right ), set this value larger.
Do not set this value to less than 2.
Set this value to 0 to turn it off.
You'll also be interested in:
Examples of using Value
Show more
Adjustments of value are recognized in the income statement
Promoting and reinforcing local value systems
Farms and market value of agricultural products
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
