Examples of 'setting and then' in a sentence
Meaning of "setting and then"
setting and then: This phrase appears to be incomplete or could be part of a larger sentence that was not provided
How to use "setting and then" in a sentence
Basic
Advanced
setting and then
The cure is to delete the setting and then reset it.
Select a setting and then press the OK button.
It is advisable to begin with the highest setting and then reduce the.
The consequences of setting and then missing stretch goals can be profound.
We recommend preheating the device at the highest setting and then turning it down.
Start on the highest setting and then turn to a lower setting to complete the process.
If you are not used to clipping hair, begin with a higher setting and then.
The password can be renewed by setting and then saving as confirmation.
Setting and then click Site Survery.
Select the lowest power setting and then switch on the vacuum cleaner.
If you are not used to clipping hair, begin with a highest setting and then.
Adjust the temperature setting and then set the steam control according to the table below.
The pump should operate for the pre-determined run time setting and then stop.
Change the setting and then push the OK button.
It 's like someone pulling the cloth from underneath a table setting and then pissing their pants.
See also
Select a setting and then press the ENTER button.
Press the Timer pad to view the current setting and then to change the setting.
Go to Setting and then choose General.
Which setting to choose, begin with a low temperature setting and then increase the temperature gradually.
Select User Setting and then click “ Fingerprint registration ”.
Confirm the setting, Select the minute setting and then.
Press down to scroll to TAM Setting and then press the Select soft key.
If you change a system setting and then discover a problem, you can easily reverse the change.
Press the 4 button to access the COMFORT temperature setting and then set the value using 4-5.
To defrost bread, select the desired setting and then press the defrosting button.
Press OK button of the receiver, choose setting and then choose register.
Press to select a 3D Sync setting and then press Enter to confirm.
Press + or - to select a setting and then press to change it.
Undo the SD Card 's write protection setting and then try again P. 18.
You'll also be interested in:
Examples of using Setting
Show more
I am setting the bar low so we are not disappointed
Adjust the volume setting to an audible level
Setting the running date and time
