Examples of 'setting unit' in a sentence
Meaning of "setting unit"
setting unit: This phrase could refer to a component or device used to adjust or determine the setting of something, such as a thermostat or a control panel. It implies a unit that is responsible for establishing or configuring specific parameters
How to use "setting unit" in a sentence
Basic
Advanced
setting unit
Setting unit rates for charging zones.
Note that the default setting unit is kg.
The setting unit can decode the encoded replacement difference coefficient and the encoded difference coefficients.
Function generator setting unit.
The dummy run mode setting unit sets and activates the dummy run mode.
Thus a count up signal is transmitted to the program setting unit.
The redirection request setting unit is adapted to set a redirection request.
Make sure cutting blades have stopped before setting unit down.
The setting unit 1 is disposed in a NodeB or an eNB.
The control unit includes a target idle speed setting unit and a phase restriction unit.
Avoid setting unit in direct sunlight or outside, if possible.
According to the invention the virtual weight value setting unit sets the virtual weight values.
The setting unit 2 indicates which algorithm has to be used.
Member States remain responsible for setting unit rates of charges.
An input setting unit 2 sets input of the fan motor 1 by using a variable resistor.
See also
This is a function of the control unit 10 as a target rotational speed setting unit.
The color key setting unit 8 can set any color as the transparent color.
The diode l4 serves to prevent unnecessary current consumption from the setting unit la.
A filter constant setting unit configured to set the filter constant of the filtering unit ;.
The estimated road surface friction coefficient µ is output to the threshold setting unit 26.
The division range setting unit 25 executes the calibration operation as follows under such settings.
FIG . 9 is a diagram describing an example of limiting a template shape by a template shape setting unit.
The temperature setting unit 12 outputs a set ambient temperature Tset set by a user.
Servo-potentiomter setting unit.
Setting unit of measure Press and hold UNIT / LIGHT button until the units of measure changes.
Fig . 3 is a sectional view of a focusing unit and a setting unit.
Setting unit to turn off after 5 hours.
A evaporation-temperature setting unit.
A priority setting unit 16 determines the use priority of a device.
Fig . 2 shows a detail of the number of times of period setting unit 7.
A maximum current setting unit 37 sets its maximum current value.
The determination result is output to the target control value setting unit 23.
The área setting unit 40 sets a plurality of areas in a target image.
A ambient temperature detector 8 and a temperature setting unit 12 are connected to the controller 5.
Each setting unit is 30 minutes and the setting is only valid for minutes.
The control unit and printing setting unit 14 construct a test printing system.
The setting unit 100 changes the weight value in accordance with a schedule.
Fig . 38 is a diagram for describing the functions of the division range setting unit.
When the printing setting unit 14 is powered on, a menu window appears on the display.
In this step, a ( desired ) heating power setting by a heating power setting unit is inhibited.
A tap setting unit 4 sets the tap changeover level of the fan motor 1.
Next, the configuration of the target control value setting unit 23 will be described in detail.
The locking setting unit 370 may receive an input for setting the locking function.
Specific configurations of the focusing unit 23 and the setting unit 24 will be described later.
The setting unit 140 may perform a role of setting the initiative between safety communication devices.
For the setting, the segmenting range setting unit 25 executes the calibration operation as follows.
With this process, ( optional ) heating power setting by the heating power setting unit is prohibited.
And the pressure reduction pulse setting unit 60 performs a drive control on the fluid pressure unit 18.
The timer IC94 is equivalent to the setting unit.
In other words, the subframe setting unit 145 sets the selected subframe as the uplink subframe.
You'll also be interested in:
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
Examples of using Setting
Show more
I am setting the bar low so we are not disappointed
Adjust the volume setting to an audible level
Setting the running date and time
