Examples of 'shaft rotation' in a sentence
Meaning of "shaft rotation"
shaft rotation: Shaft rotation refers to the movement or spinning of a shaft, typically in mechanical or engineering contexts. It could also be used metaphorically to describe a cyclical process or change
How to use "shaft rotation" in a sentence
Basic
Advanced
shaft rotation
This amount of shaft rotation is known as a step.
Lock the collar in direction of shaft rotation.
Output shaft rotation of your choosing.
The tests were conducted at various shaft rotation speeds.
Shaft rotation can be monitored to obtain specific flow rates.
It rather works synchronously with the shaft rotation.
Shaft rotation speed.
Device for detecting steering shaft rotation angle.
The drive shaft rotation speed corresponds to the vehicle speed.
Surgical instrument with motorized articulation drive in shaft rotation knob.
Direction of shaft rotation and speed can be controlled easily and smoothly.
This makes such a coupling unusable at high speeds of shaft rotation.
The shaft rotation enhances the wash result by the mechanical movements.
Adjustments are made by changing the shaft rotation speed and machine inclination.
Other secondary characteristics enable it to operate at very high speeds of shaft rotation.
See also
The time and shaft rotation speed are chosen to give measurable results.
The above takes place within limits of the cam shaft rotation.
The output shaft rotation sensor detects the rotation of an output shaft of a transmission.
There is always a difference between the direction of shaft rotation and resultant direction.
A sensor detects shaft rotation and an electronics package is used for interpreting the sensor output.
The stop means can be arranged to have a braking effect on shaft rotation if required.
Press the shaft lock to prevent shaft rotation when installing or removing the bit.
The vehicle speed is determined from an output signal from an output shaft rotation sensor.
If the stated shaft rotation is continued a situation results as shown in figure 3.
The generator shaft is equipped with magnets for converting shaft rotation into electric power.
The shaft rotation is among the strongest I have seen and that 's a definite plus.
Before starting articulated telescopic shaft make certain that the PTO shaft rotation direction is correct.
The shaft rotation frequency fROT is often referred to as “ order 1 ”.
Cooling system Ignition system PTO shaft rotation.
As mentioned above, the shaft rotation frequency fROT is often referred to as " order 1 ".
First, a feedback signal is required to determine the direction of shaft rotation.
The operating conditions of the run included a shaft rotation speed as indicated in Table 1.
Figure 4 is a cross-sectional view of the mechanism which enables handle to shaft rotation.
The sensor for picking up the output shaft rotation speed could be a Hall-effect sensor,.
In some embodiments, the locating surfaces are parallel to the shaft rotation axis.
Utilizing two magnets, input shaft rotation can be accurately measured to within 0.1 % of maximum range.
Simple system for adjusting amplitude / frequency by selection of vibratory shaft rotation direction.
Maximum allowable PTO shaft rotation speed is 540 rpm.
The seal ring 73 may then remain stationary during shaft rotation.
Patented Muncie drag brake, Prevents shaft rotation in “ OFF ” mode.
In this manner, the testing device computer receives 3000 increments per motor shaft rotation.
It is prohibited to apply other PTO shaft rotation speed than 1000 rpm.
The close fit in guides 34 and 36 maintains axial alignment, while permitting trephine shaft rotation.
Key 5a . centre of shaft rotation.
Note that curve A is periodic, repeating itself every 360 ° of shaft rotation.
Remove the wrench ( 2 ) to restore shaft rotation.
You'll also be interested in:
Examples of using Rotation
Show more
In left rotation the safety clutch is deactivated
I would estimate a half rotation before it is over
Its rotation is guided by the drive shaft
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
