Examples of 'shaft tube' in a sentence
Meaning of "shaft tube"
Shaft tube - This phrase might refer to a component or structure in machinery or engineering that resembles a tube or shaft
How to use "shaft tube" in a sentence
Basic
Advanced
shaft tube
Loosen the bolts at shaft tube end of engine.
Tighten tube locking bolt lining up the hole in the shaft tube.
Mount the handle to the shaft tube and clamp it at a.
When assembling it may be necessary to lightly jiggle the lower shaft tube.
Excessive force can damage the shaft tube and mainshaft.
Shaft tube Part of the unit that provides a casing for power transmission shaft.
Mount the handle to the shaft tube and.
Installation of the lower shaft tube into the hedge trimmer attachment angular gear.
Pull gear box and shield from shaft tube.
Possible as the lower shaft tube can be replaced with the tool head attached.
Assemble loop handle and bracket to shaft tube assembly.
Release the shaft tube connection straining screw 10.
Always stand so that your body is on the left of the shaft tube.
Install the blade guard on drive shaft tube against angle transmission.
Delivered with a pre-assembled lower shaft tube.
See also
Insert the shield between the shaft tube and the bracket with a spacer.
Ensure that the storage points on the universal joint and shaft tube are clean.
Attach the handle to the drive shaft tube with the angle towards the engine.
Remove all grass and weed remnants at regular intervals to prevent the shaft tube overheating.
Do not force the shaft tube into the powerhead!
The fixing pin ( 2 ) must audibly lock into position in the shaft tube holes.
Pull the lower shaft tube ( 3 ) with gearbox from the female coupling.
Fig . 6 shows insertion of a clip magazine into the shaft tube of a clip applicator.
The left handle shall be at least 200mm horizontally perpendicularly from the shaft tube.
Fit a spacer and the shield support on the shaft tube and tighten four bolts ( M5 X 45 ) lightly.
Release the three gearbox screws ( 2 ) and push the gearbox off the shaft tube.
Install tube guard ( A ) onto outer shaft tube.
The cutting unit 13 is by means of a turnable connection A supported by the shaft tube 12.
Fig . 3A shows a cross-section through the distal region of the shaft tube.
You'll also be interested in:
Examples of using Tube
Show more
The telescopic tube must be tightly locked
Tube him while you have an airway
Replace with a new tube connecting piece
Examples of using Shaft
Show more
This is the shaft of the pry bar
Shaft seal depends on water for lubrication
Blind hollow shaft or hollow through shaft
