Examples of 'shafts can' in a sentence
Meaning of "shafts can"
shafts can: Implies that someone or something can be let down or cheated in some way, typically in a situation where expectations are not met or promises are broken
How to use "shafts can" in a sentence
Basic
Advanced
shafts can
Individual rain shafts can be very deceiving.
Shafts can be partly or entirely constructed of ceramics.
The propeller shafts can be concentric.
Shafts can also be called pivots.
Lower cost gears and shafts can also be used.
The shafts can be shortened or lengthened.
The use of rods, gearing or engine drive shafts can be considered.
Fixed shafts can be manufactured from hexagon or round material.
Thus all the ends of the shafts can be reached from the outside.
Hair shafts can be easily removed from the pustules and papules.
Female threaded shaft Female threaded shafts can be manufactured from round material or hex material.
The shafts can be tapered or have a uniform diameter over their length.
The angle between said two shafts can be different in different embodiments.
The shafts can be driven at the same speed suitably from a pair of electric motors.
The first and second drive shafts can be arranged in a common vertical plane.
See also
Shafts can be manufactured from rust-free material, such as stainless steel.
One of the drive half shafts can carry the auxiliary electric motor.
However, other triangular or square shapes shafts can also be used.
One of the shafts can be driven or both can be driven in synchronism.
Thus, the number of the lens support shafts can be decreased.
Selected shafts can be adjusted to achieve the required linear alignment.
As a result of this construction the two input / output shafts can be disengaged even during operation.
Unguarded rotating shafts can create an entanglement hazard which can result in injury.
Complex decorative wooden line . The bottom shafts can modify saw blade.
Excessively protruding shafts can bend easily and contribute to poor concentricity.
According to this document, moreover, the rotary speeds of the disk-bearing shafts can be different.
The rotation of the shafts can occur in the same direction or in opposite directions.
Shafts can have a circular, flat, or other cross-sectional shape.
Because they are coaxial, these shafts can run along a common structural arm.
The anvil shafts can be supported by operative anvil bearings and corresponding bearing mounts.
For example, graphite shafts can not be better than steel for you.
Such long shafts can be a difficult design problem and must carefully control any shaft vibration.
The angle between the shafts can be anything except zero or 180 degrees.
The shafts can still be found on the Singing Pass trail.
The splines 20, 22 of the shafts can have a square, rectangular or trapezoidal cross section.
Said driven shafts can also be driven by other driving sources, in a timed manner.
Spring-loaded shafts can be manufactured from round material or hex material.
Thus, the drive shafts can be driven with an extremely high positional accuracy.
Said rotor shafts can be applied on towed or self-propelled machines, for example even trailers.
The column shafts can be as tall as 20 metres.
