Examples of 'shank diameter' in a sentence
Meaning of "shank diameter"
shank diameter: It is a term used in engineering and manufacturing to describe the diameter of the shank or central part of a cylindrical object, such as a bolt, screw, or tool
How to use "shank diameter" in a sentence
Basic
Advanced
shank diameter
Always use cutters with a shank diameter.
Make sure the wheel shank diameter corresponds to the collet aperture.
Only use grinding points with a matching shank diameter.
Always use cutters with a shank diameter corresponding to the size of.
The shank diameter is generally dependent on the load to be supported by the connector.
Use always a collet which is suitable for the shank diameter of the bit.
Use bits of the correct shank diameter suitable for the speed of the tool.
Only the permissible accessories with the appropriate shank diameter must be used.
Shank Diameter mm.
The first portion has a shank with a first shank diameter and a first thread.
The tool shank diameter must exactly match the collet bore ( 1 )!
Tolerance cutting edge diameter Tolerance shank diameter.
Use only router bits with proper shank diameter and suitable for the power tool speed.
The router is designated to operate with router bits with shank diameter 6 and 8 mm.
Use router bits with a shank diameter of 12 mm as far as this is possible.
See also
Replaceable chuck for drill bits up to 16 mm shank diameter.
Slotter cutter with a max shank diameter of 8 mm and a max diameter 25 mm ;.
The cap is connected to a hollow threaded shank diameter 0,5 cm.
The tool 's shank diameter must correspond exactly to the collet bore of the collet chuck ( 1 )!
On the upper side of the first engagement groove, the shank diameter is tapered upwardly.
Uses ball with 1 " shank diameter.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Shank
Show more
Insert blade shank from the front
The shank may be totally or partially threaded
Drill pilot and shank clearance holes
