Examples of 'shear conditions' in a sentence
Meaning of "shear conditions"
shear conditions: This term likely refers to specific circumstances or situations that require cutting or trimming, like in agriculture or engineering. It may involve dealing with materials or elements that need to be separated or divided
How to use "shear conditions" in a sentence
Basic
Advanced
shear conditions
Sulfate reduction did not commence under no shear conditions.
High shear conditions are brought about by the screw design.
The mixing speed was reduced to lower shear conditions.
General shear conditions.
The samples were prepared under low shear conditions.
Alternatively the high shear conditions can be applied to the final composition after preparaton.
Mixing is generally performed under low shear conditions.
One way to characterize the shear conditions is by the fluid velocity.
The second mixture is formed under high shear conditions.
Furthermore, any variation in the shear conditions causes a structural modification delayed over time.
Dispersion of this coprocessed material requires high shear conditions.
For example, various parameters, including shear conditions and order of addition are important.
The remaining components are then added under low shear conditions.
However, moderate wind shear conditions returned the following day, weakening the tropical cyclone.
The first mixture is formed under high shear conditions.
See also
This emulsion was stirred under higher shear conditions to form the final emulsion.
Reconstitution or rehydration of this coprocessed material requires high shear conditions.
The mixture is then agitated under high shear conditions to yield a dispersion.
This model allows to better understand molecule aggregation mechanisms under shear conditions.
All mixing was performed under very low shear conditions and at room temperature.
The heating and kneading process is generally conducted under low shear conditions.
The composition is then mixed under low shear conditions to form the water-in-oil emulsion.
The emulsion is generated and maintained under high shear conditions.
The elevated rotational velocity imparts very high shear conditions within the milling chamber.
The relative performance of each additive system remains the same under different test shear conditions.
The high molecular weight PTFE components form micro fibrils under shear conditions during plastic molding.
For example microparticulated whey can be formed under specific ionic strength and shear conditions.
Typically, the thermoplastic phase will be subjected to high shear conditions within an appropriate mixer.
All materials displayed shear thinning behaviour under high shear conditions.
As shown, the viscosity variation from high shear to low shear conditions is very marked.
The immiscible thermoplastic polymer components and the fibers are blended together under high shear conditions.
The mixture was heated to 80°C and mixed under high shear conditions for 10 minutes.
The emulsification of compound 2 in compound 1 is conducted at elevated temperature under high shear conditions.
Such formulations rapidly regain their high viscosity when the high shear conditions are removed.
Formation of this optional mixture may be formed under low shear or high shear conditions.
Injection moulding the melt blend within the temperature and shear conditions of step ( b ).
The blend is then gently mixed using a conventional mixer under low shear conditions.
This may be a normal mixing or a mixing under high shear conditions.
The process is preferably carried out under moderate to low shear conditions.
A pregel is prepared by mixing thickener and water under high shear conditions.
The oil was then added and mixed in using medium or moderate shear conditions.
The shear thinning behavior allows the spraying of the product under high shear conditions.
Mixers include the aforementioned or other similar equipment that produce high shear conditions during mixing.
A visible image from Terra showed the storm formed despite being under wind shear conditions.
Material G exhibits a mild viscosity decrease resulting from the shear conditions applied.
The shear process step 2 is desirably conducted under high shear conditions.
Based on the viscosity profiles, maximum viscosity is obtained under high shear conditions.
Those bindings have been, for the first time to our knowledge, under shear conditions.
The advantageous properties of the water-in-water polymer dispersions are maintained under shear conditions.
Moulding the pellets of the melt blend within the temperature and shear conditions of step ( b ).
You'll also be interested in:
Examples of using Shear
Show more
I am like a shear genius with these scissors
Mineralization is related to sulphides in the shear zones
K shear wave transducers with transducer frequency
Examples of using Conditions
Show more
There are no conditions or costs attached to this service
This sector is characterised by poor working conditions
Conditions and modalities for reimbursement or payment
