Examples of 'shear tests' in a sentence
Meaning of "shear tests"
shear tests - These are experimental procedures used to determine the mechanical properties of materials, especially in the field of engineering
How to use "shear tests" in a sentence
Basic
Advanced
shear tests
The implementation of pure shear tests is very difficult.
Shear tests generally make it possible to characterize a joint.
The residual interface behaviour was investigated by multiple reversal direct shear tests.
Direct shear tests can be performed under several conditions.
Undrained strengths from the two types of shear tests have been correlated.
This shear tests campaign is completed by a series of laboratory monotonic torque tests.
A comparison is made between constant volume and truly undrained simple shear tests.
Shear tests were performed on butterfly specimens and compression tests were performed on cylindrical specimens.
The strength of this interaction can readily be measured by mechanical peel or shear tests.
Direct shear tests were performed drained under conditions of natural moisture and submerged in water.
Specimens for resistivity measurement and lap shear tests were cured and tested.
Direct and triaxial shear tests of the soil indicated very high effective angles of friction.
The shear behavior of a rock joint chemically damaged was studied through direct shear tests.
Friction angles measured from conventional direct shear tests on the same specimen are similar.
Will be present the test results of the specimens and the bending and shear tests.
See also
The shear resistance measured from the shear tests compared quite well with the model simulation.
The quality of wire bonds were tested with wire pull and ball shear tests.
The shear tests in FCC metals are also studied.
These equations are compared with similar ones that were developed previously using torsional shear tests.
We perform on-site peel and shear tests on destructive samples.
Shear tests between mortar, steel and silt were also carried out.
The results for the bond strength by oblique shear tests are shown in Table.
Two large-scale in situ shear tests were conducted at a damsite in western Canada.
To determine the strength parameters, were conducted conventional shear tests on submerged soil samples.
The shear tests at 25°C evidenced lowershear strength on specimens with higher porosity.
Mechanical characterization was performed using tensile and shear tests ( monotonic and cyclic ).
The peel and shear tests for this UV-cured tape are shown in Table 1.
The selection of the suitable tool is made in advance, based on laboratory shear tests.
Results from thermal, flexure, and racking shear tests performed on the wall are reported.
Key words, mobilized undrained shear strength, in situ vane test, laboratory shear tests.
This paper describes large-size direct shear tests on soil-geotextile interfaces.
The plywood panels ' mechanical characterisations are realised using standardised shear tests and bending tests.
The peel adhesion and static shear tests results are summarized in Table 6 . TABLE 6.
Characterization at lab scale consisted of rotating drum measurements, shear tests and density measurements.
The distance between supports was 12.5 mm for interlaminar shear tests and 50 mm for flexural tests.
This appears to be borne out in the shear tests ( see Fig . 1 ).
You'll also be interested in:
Examples of using Shear
Show more
I am like a shear genius with these scissors
Mineralization is related to sulphides in the shear zones
K shear wave transducers with transducer frequency
Examples of using Tests
Show more
These tests are now not thought to be necessary
Your cooperation in these tests is greatly appreciated
God tests our faith in many ways
