Examples of 'shearing force' in a sentence
Meaning of "shearing force"
shearing force ~ a type of force in physics or engineering that is applied parallel to a surface, causing it to slide in relation to an adjacent layer
How to use "shearing force" in a sentence
Basic
Advanced
shearing force
A shearing force causes indirect injury and microbleeding.
Single bolt with axial and shearing force.
Shearing force is approaching critical.
In particular application the liposomes are subjected to shearing force.
Shearing force variation.
In particular applications the liposomes are subjected to shearing force.
The adding process of this shearing force is a characterizing portion of this invention.
A push rod attached to the upper ring received the shearing force during testing.
This is the shearing force which places the skin surface in tension.
Block subjected to a shearing force.
A solid can withstand a shearing force due to the strength of these sticky intermolecular forces.
This disintegration may be obtained by applying a shearing force to the cooled mixture.
Depending on the shearing force the suitable parameters can be read off a viscosity diagram.
The force F is called the shearing force.
The term tensile force and shearing force is understood to mean a resultant force.
See also
Viscosity is a property that defines a fluid 's resistance to shearing force.
When the shearing force is abated the fluid returns to its more viscous condition.
In addition, the spars participate in the perception of the shearing force.
The shearing force remains unchanged throughout the whole process and the shearing action is stable.
As was previously mentioned, this greatly increases the shearing force on the knees.
The ratio of the shearing force to the area A is called the shear stress.
During forward flushing, no filtration occurs and impurities are removed by a shearing force.
A shearing force T normal to this average fiber.
When the rotor blade enters a wake it is exposed to a step-like shearing force.
However, the shearing force is independent of the thickness of the layer.
In this case, however, high speed agitation providing a high shearing force is needed.
By applying a shearing force in this way, excellent mixing of reactants may be achieved.
These techniques often involve the use of an extruder, which provides a substantial shearing force.
However, an increase in the shearing force results from an increase in the compressive force.
As the result, the region which is effected by the uniform shearing force becomes narrow.
By the shearing force thereof, the aggregated or steric structure of particles can be dissociated.
Next, to the slurry and the collector is added shearing force in the submerged agitator 4.
If a high speed shearing force is possible, other wet type pulverizers can also be used.
When the retentivity is less than this value, peel-off easily occurs for a shearing force.
Thereby, the sidewalls may apply a shearing force in a transverse direction to the brake pads.
Therefore, the gas phase alone can not remove small contamination because of insufficient shearing force.
When the shearing force ceases, the structure is recovered and the viscosity increases again.
The state of component ( A ) upon application of a shearing force is not particularly limited.
Typically, the shearing force decreases linearly from the end of the beam towards the middle.
Also, the Joule Thomson valve will generate a relatively large shearing force on the liquid stream.
A shearing force was applied at 1 mm / minute.
The measurement is then effected, in particular, of the shearing force.
In a high-speed fixation, a higher shearing force is exerted than in a low-speed fixation.
Example 4 - 7 are gel formulations which are prepared with a shearing force.
Thereby, the grooves 30 will apply a shearing force in a transverse direction of the brake pads.
The suspension is homogenised for 30 seconds by using a high shearing force.
When the required shearing force is reached the toothings 13 fracture and the fuse 5 is ejected.
Advantageously, the penetrating stud ( 43 ) is dimensioned in order to break under the shearing force.
This shearing force helps to promote intimate mixing of the reactant ( 15 ).
Thus, the anchor is able to stand a shearing force in the region of 800daN.
You'll also be interested in:
Examples of using Shearing
Show more
Only shearing and tensile forces are permitted
This applies a high shearing on the material
The shearing has revealed a serious problem
Examples of using Force
Show more
With the sheer force of the blast
Force them to tell us where the shards are
Excessive use of force by law enforcement officials
