Examples of 'sheet resistance' in a sentence
Meaning of "sheet resistance"
sheet resistance: Sheet resistance is a measure of the resistance to electrical current flow in a thin, uniform layer of material. It is commonly used in the field of semiconductor technology to assess the conductivity of films or coatings deposited on surfaces. Sheet resistance is calculated by dividing the resistance of the material by its cross-sectional area
How to use "sheet resistance" in a sentence
Basic
Advanced
sheet resistance
Surface resistivity is also referred to as sheet resistance.
The sheet resistance of this material is thus high.
During the test the sheet resistance was measured.
Low sheet resistance values are indicative of low emissivity.
This is used to measure sheet resistance.
The sheet resistance may be even lower in certain embodiments.
Rs is then considered the sheet resistance.
Low sheet resistance is achieved in certain example embodiments of this invention.
An average was taken in order to get the average sheet resistance.
Calculating sheet resistance.
The same tendency was also observed for the sheet resistance.
The sheet resistance for each film is indicated by the data points in the graph.
The inset also shows the values of electrical sheet resistance.
The electrical sheet resistance values for each film are also shown in the inset.
This restriction of current flow is due to an effectively higher sheet resistance.
See also
Destructive techniques for measurement of sheet resistance and mobility are also known.
The bright stripes are silver paint lines used to estimate the sheet resistance.
The grid pattern also produces low sheet resistance to current passing through the current collector.
The slide was used to measure film thickness and sheet resistance.
The actual sheet resistance is related to these resistances by the van der Pauw formula.
The layer which coats the substrate has a relatively high sheet resistance.
Thereafter, a sheet resistance of graphene was measured by a four probe method.
No optical imperfections were noted after shrinking and the sheet resistance values remained constant.
Material, sheet resistance of transparent high impact and weight.
The test components were equipped with electrodes, and the sheet resistance was measured.
Thereafter, the sheet resistance of the metal film was again measured.
Here, this is a relative decrease, with respect to the sheet resistance value before treatment.
Indicates the sheet resistance of the multilayer coating in ohms per square ;.
The data are then interpreted to obtain mobility, sheet charge density and sheet resistance readings.
R, which indicates the sheet resistance of the multilayer coating in ohms per square ;.
The low-loss metal may have higher conductivity and lower sheet resistance compared to polysilicon.
Like the sheet resistance band, tube style bands can also come in hoops.
The above-described multilayered structure has a sheet resistance which is less than 4 ohms per square.
A contactless sheet resistance measurement apparatus as claimed in any one of the preceding claims, wherein ;.
As an additional check, contactless electrical sheet resistance measurements were performed using a Nagy.
The sheet resistance of the reduced graphene oxide over glass is less than 3 kOhm.
Fig.11 shows the variation of electrical sheet resistance as a function of bending cycles.
The sheet resistances were normalized so that the initial sheet resistance was 1 for all components.
The transparent, electrically conductive coating 3 has a sheet resistance of 4 ohm / square.
Table 12 below indicates the sheet resistance and light transmission values before and after treatment.
Without reusing the reflected portion of the main radiation, the loss of sheet resistance is 18 %.
The sheet resistance of this material is lower than that of example A1a.
More preferably, this heating element has a sheet resistance of less than 60 ohms / square.
The sheet resistance value of the transparent conductive layer is preferably 10 Ω or less.
Preferred coatings have a silver layer at least 22.5 nm thick to provide even lower sheet resistance.
The sheet resistance is deduced using the Ohmic law in Ohm / square.
The above preferred heat reflector has a sheet resistance which is less than 17 ohms / square.
The sheet resistance of the multilayer before treatment was 3.3 ohms.
The coating was electrically conductive with a sheet resistance of less than 2000 ohms per square.
TABLE 1 Sheet resistance measurements of the samples.
You'll also be interested in:
Examples of using Resistance
Show more
National resistance to the occupation was therefore legitimate
This must result in a resistance value of approx
Resistance to surface damage by fine particles optional
Examples of using Sheet
Show more
Polycarbonate sheet to protect against direct contacts
We got all type of potential on this sheet
Model information sheet for local communities
