Examples of 'shell thickness' in a sentence
Meaning of "shell thickness"
shell thickness: This phrase is used in engineering or construction contexts to describe the measurement of the thickness of a shell or protective layer of a structure
How to use "shell thickness" in a sentence
Basic
Advanced
shell thickness
Minimum shell thickness for spherical tanks.
Change in vessel shell thickness.
Minimum shell thickness mm reference steel.
The burst strength increased with increasing shell thickness.
Minimum shell thickness in reference steel.
Calculation of shell thickness.
Shell thickness also determines the volume of drums.
Minimum shell thickness.
Shell thickness and uniformity are measured.
E minimum shell thickness in mm.
The fourth active parameter of the model is the shell thickness.
Consistent shell thickness guarantees proper strength and weight.
The particles are maintained in the reactor until a desired shell thickness is achieved.
The shell thickness is reduced due to its expanded state.
Thus the attenuation coefficient may be controlled by varying the shell thickness.
See also
The minimum shell thickness shall be the greater thickness based on.
This may be repeated several times until the desired outside shell thickness is achieved.
Ventral shell thickness and colour had independent effects on mussel selection.
Preferably calculating a tensile stress comprises measuring a shell thickness and curvature of the said eggshell.
Shell thickness shall be verified ultrasonically at intervals midway between periodic hydraulic tests.
The addition of TEOS and ammonia was continued until the desired shell thickness was obtained.
The shell thickness of the microcapsules tend to increase as the particle size increases.
The connectors are hollow with a shell thickness of 3 mm.
The shell thickness may vary from one atomic monolayer to several tens of nanometers.
O specifying allowable shell thickness reductions ;.
A uniform shell thickness will be free of the stresses that can lead to a longitudinal cracking.
The objective is to produce monodispersed capsules of controlled size, content and shell thickness.
Precise control over silica shell thickness is achieved simply by regulating the duration of growth.
Among the variables are haugh unit, white and yolk ph, yolk index and shell thickness.
Shell thickness gauge to detect reduction in shell wall thickness due to elongation during expansion.
Compression-coated dosage forms are limited by the shell thickness and shell composition.
Minimum shell thickness in mm-reference steel.
Dynamic light scattering tests and transmission electron microscopy show that the shell thickness is 77 nm.
Comparison between the solidified shell thickness measured by radioactive tracing and calculations carried out using.
DR is the ratio of average . particle diameter measured shell thickness.
Minimum shell thickness for the metal chosen, in mm.
In the Shell Definition PropertyManager, select in and type 1 in for Shell thickness.
As the shell thickness decreases, the maximum absorption wavelength increases.
Preferably, the microcapsule shell thickness is in the range 3 to 7 µm.
The shell thickness of the shear-sensitive microcapsules tends to increase as the particle size increases.
Near the corners, the solidified shell thickness is uniform the whole length of the mold.
A shell thickness of less than 0.2 nm results in atoms or molecules.
The sub-blades have a constant shell thickness of 2 mm.
No differences in shell thickness were between the control and microwave-treated eggs.
Tanks for transport of solj-ds m, ust have a minimum shell thickness of 6 mm.
To illustrate how a shell thickness may be selected, the synthetic microparticles previously described are considered.
The evaluations were, egg weight, specific weight, shell resistance, shell thickness and haugh units.
E1 minimum shell thickness for the used metal, in mm.
Line scan data extracted from the EDX spectrum images suggests a shell thickness of approximately 1 - 4 nm.
The silica shell thickness was approximately 30 nm.
You'll also be interested in:
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
Examples of using Shell
Show more
Shell made from injected thermoplastic resin
All we had was the shell he left behind
Shell design code pressure vessel code
