Examples of 'shims' in a sentence
Meaning of "shims"
A shim is a thin piece of material used to align or adjust parts within a machine or mechanism
Show more definitions
- plural of shim
- third-person singular simple present indicative form of shim
How to use "shims" in a sentence
Basic
Advanced
shims
Use shims to add stability when needed.
This is where shims come into play.
Use shims to level the freezer if necessary.
Replace all washer shims some models.
Wood shims recessed bottom cabinets only.
It should not be reduced with shims or washers.
These shims are removed before polymerization begins.
Adjust the backlash with the shims.
If needed use shims to level the unit.
Shims intended for only one client.
Under these shims are stuck the pads.
Denso injector repair kits injector shims.
Shims may be used between truck center plates.
An alternative approach would use thickness shims.
To attach the shims to the cabinet proceed as follows.
See also
Applied directly through levelling shims.
Use shims if measured distance is incorrect.
Replace any applicable door shims.
Place the shims loosely between the brushes.
Spacer discs are supplied with shims of varying thickness.
Shims must be securely attached to the floor to keep.
Bricks or shims to raise the mesh.
Shims must be securely attached to floor to prohibit their.
Do not disturb position of hinge shims.
The shims were removed and the track was surfaced.
Remove and retain all shims.
Metal shims must be used on fire rated opening.
Tighten and secure the shims and castors.
Add shims under the wheels.
Level by fitting metal shims under the feet.
Use shims as necessary to level cabinet.
They are then assembled on the hypotenuse of the shims.
Use shims to level the refrigerator.
Medial and lateral shims are provided.
Shims with youth well guarded.
This sequence is repeated using shims of incremental thicknesses.
Solid shims may be used if necessary.
Never use damaged or incorrect saw blade shims or screws.
Use shims if necessary to make wooden fillers flush.
Transfer all hinges and shims to opposite side of cabinet.
Shims can be used to control the final thickness.
In a preferred embodiment internal shims are positioned in the distribution channel.
Shims can adjust this spacing.
No there were not any shims in place to start with.
Shims made out bobby pins and paper clips.
Inspect door to verify all shims are with hinge pin.
Different shims exist for protocols at different layers.
My fool mechanic had neglected to install the proper shims.
Adapters and shims may be required on some machines.
General recommendations for shims.
