Examples of 'shoe plate' in a sentence
Meaning of "shoe plate"
shoe plate: A shoe plate refers to a metal or plastic insert that is attached to the sole of a shoe for added support or to improve traction. Shoe plates are commonly used in sports like baseball or cycling to enhance performance
How to use "shoe plate" in a sentence
Basic
Advanced
shoe plate
Move the shoe plate slightly forward.
Tillage depth can be regulated by lowering or raising the central shoe plate.
To reset the shoe plate for straight cuts.
Insert or remove a blade from the Shoe Plate.
Push the shoe plate forward.
Further, the fingers are turned to extend generally parallel to the shoe plate 58.
Pull the shoe plate forward and set it to an angle of.
Never use the tool when the shoe plate is loose or removed.
Pull the shoe plate backwards and set it to an angle of approximately 0.
Fig . 4 is a front view of a shoe plate of the drum brake.
Ball guide shoe plate swash plate spring washer shaft gear.
Other shoelace eyelets can be mounted on other fixed peg on the shoe plate 102.
Make sure that the shoe plate is supported by the guide ribs.
The heat elements are preferably positioned adjacent indentation 79 in the shoe plate lower surface 75.
U Pull the shoe plate backwards and set it to an angle of.
See also
Raise the dust shroud ( 3 ) and loosen both screws on the shoe plate with a screwdriver.
Adjusting the shoe plate for bevel cuts fig . d.
Turn the locking knob ( 8 ) in direction B to lock the shoe plate in place.
Adjusting the shoe plate for bevel cuts fi g. F.
Turn the locking knob ( 9 ) in direction A to release the shoe plate 8.
Adjusting the shoe plate for bevel cuts fig . B.
The shoe plate can be set to a left or right bevel angle of up to 45.
Next, loosen the hex screw securing the shoe plate ( 6 ) using the same hex key.
Push the shoe plate backward and tighten the screw 19.
Adjusting the shoe plate for bevel cuts fig . F.
The shoe plate ( 7 ) should be held fi rmly against the material being cut.
Adjusting the shoe plate for bevel cuts fig . J.
The shoe plate ( 7 ) should be held firmly against the material being cut.
The purpose of the shoe plate 102 is to provide support for a shoe.
The shoe plate 102 can be mounted onto a main plate for printing by a Printing device.
Pull the shoe plate locking lever ( 4 ) outwards.
The shoe plate 602 further comprises a plurality of through-holes 714 through which other pieces can be fastened.
Rotate the shoe plate ( 4 ) until the slot in the.
Pull the shoe plate ( 8 ) backwards and set it to the required angle.
Pull the shoe plate locking lever ( 4 ) outwards to unlock.
Pull the shoe plate ( 8 ) forward, set it to the required angle.
Push the shoe plate ( 4 ) forward until the saw blade.
Pull the shoe plate ( 7 ) forward and set the required bevel.
Rotate the shoe plate ( 4 ) until the slot in the shoe plate.
Push the shoe plate locking lever ( 5 ) back towards the saw to lock the shoe plate 7.
The shoe plate 40 is as shown in Fig.
U Pull the shoe plate ( 7 ) backwards and set it to the required.
Adjusting the shoe plate for bevel cuts ( fig . F and G ) Warning!
Adjusting the shoe plate for bevel cuts ( fig . E and F ) Warning!
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Shoe
Show more
Place the saw shoe on the workpiece
A shoe box is a terrible place to keep film
It looks like the shoe deal is going away
