Examples of 'shore a hardness' in a sentence
Meaning of "shore a hardness"
Shore a hardness: A term used in materials science to measure the hardness of a material. It indicates the resistance of a material to indentation or deformation
How to use "shore a hardness" in a sentence
Basic
Advanced
shore a hardness
The average of two Shore A hardness readings for each sample were recorded.
The dried samples are then weighed and the Shore A hardness is measured.
A Shore A hardness thereof is used as a indicator for flexibility.
According to the kind of polyurethane used different Shore A hardness may be obtained.
The Shore A hardness and Bayshore resilience of each plate was measured as described above.
Uses are further limited because of the high Shore A hardness of such compositions.
The Shore A hardness is measured by the same method as described in Examples described later.
Applications are further limited because of the high Shore A hardness of such compositions.
The Shore A Hardness and the printing densities are comparable for all samples.
One measure of the appropriateness of the cushioning material is a measure of the Shore A Hardness.
The thickness and the Shore A hardness show little variation.
The preferred polymer of the present invention has very little or no significant Shore A hardness.
The Shore A hardness of this photosensitive resin cured product was measured at 55 degrees.
Additional advantageous properties of these resins include the elongation at break and Shore A hardness.
By soft polyurethane is meant a polyurethane the Shore A hardness of which is typically less than 50.
See also
The hardness of a flexographic printing forme precursor is typically expressed as Shore A Hardness.
Thus, even after this heat treatment the Shore A hardness of the elastomer remains constant.
Tensile sheets were then pressed and tested for tensile strength, elongation, modulus and shore A hardness.
Indicates a Shore A hardness value for said material ;.
Durometer hardness can be described by the Shore A hardness scale.
Shore A hardness on the oil-swollen film, and.
The product of the present invention generally will have a shore A hardness greater than about 70.
The wiper blade has a Shore A hardness equal to or less than 80 durometer.
In the case of a uniform resin composition, it is preferable to use Shore A hardness.
This layer may also have a shore A hardness greater than 70.
The value measured 15 seconds after measurement was used as the Shore A hardness.
Such elastomers have a shore A hardness of less than 65 before grinding.
These dimensions are given relevant to a silicone material having a Shore A hardness of about 40.
The elastic material preferably has a Shore A hardness ranging from approximately 30 to approximately 90.
The laryngeal mask may for instance be made of a PVC having a Shore A hardness about 48.
The room temperature Shore A hardness of such a composition may range from 50 to 70 points.
Again it is preferred that the material chosen have a Shore A hardness of about 25.
Shore A hardness is a mechanical characteristic of an elastomeric material measured in accordance with standard DIN 53505.
Preferably, a soft substance of very high deformability has a Shore A hardness of less than 5.
A preferred elastomeric compound has a Shore A hardness in the vulcanized state of 63 and a modulus of 7 MPa.
The plastic of the molding is a polyurethane with a Shore A hardness of 60.
The Shore A hardness was measurable after 5 minutes and reached its maximum value after 20 minutes.
It relates more particularly to such compositions whose initial Shore A hardness does not exceed 85.
The Shore A hardness is usually equal to at least 60.
The layer of mix of very high elasticity modulus has a Shore A hardness greater than 70.
The Shore A hardness of the elastomer sheet was 55.
Preferably, the product of the present invention will have a shore A hardness greater than 80.
This material has a Shore A hardness of approximately 95 degrees.
In one embodiment of the invention, silicone of 30 Shore A hardness is used.
The Shore A hardness was measured according to the specifications of standard ISO 868.
Advantageously the thermoplastic elastomer has a Shore A hardness in the range of 40 to 80.
The Shore A Hardness was measured by stacking sheets to make a 3/8 inch thick sample.
When completely cured, the epoxy has a Shore A hardness of about 88.
A Shore A hardness value of at least 5 is preferred, and is preferably 15.
The elastomeric material may be characterized by a Shore A hardness of from about 40 to about 70.
You'll also be interested in:
Examples of using Shore
Show more
Take shore to hope and stop on a stair
Jack lost his shore leave buddy
Ship to shore communications are in place on all vessels
Examples of using Hardness
Show more
Water hardness limitations for steam mode
Understanding of water hardness and other values
The hardness of his gaze makes me doubt it
