Examples of 'side of the blade' in a sentence
Meaning of "side of the blade"
Side of the blade: This phrase refers to one of the flat surfaces of a blade or cutting tool. It is often used in discussions about knife handling, sharpening, or the anatomy of blades
How to use "side of the blade" in a sentence
Basic
Advanced
side of the blade
Cut on the left side of the blade.
One side of the blade was coated with a deadly poison.
So possibly serrations on one side of the blade.
Sharpen each side of the blade alternately.
Material fastening is done at either side of the blade.
The opposite side of the blade corresponds to this.
Blade by pressing against the side of the blade.
Never use the side of the blade as a cutting surface.
Rotation direction is indicated by an arrow on one side of the blade.
Reattach the left side of the blade control.
The parallel fence can be mounted on either side of the blade.
The reverse side of the blade.
Each sharpening surface is specific to one side of the blade.
The markings on the side of the blade guard show.
Tighten the locator pins and repeat on the left side of the blade.
See also
Hits with the side of the blade do not halt the action.
A guide face may be formed on each side of the blade.
Touches hit by the side of the blade do not halt the action.
The rip fence can be used on both side of the blade.
Make sure the flat side of the blade shaft seal is facing upwards.
The boat turns toward the same side of the blade.
The slanted side of the blade must be aligned towards the application tool.
Sharpening the right side of the blade.
Lower the infeed side of the blade guard until it almost touches the workpiece.
You will only need to sharpen one side of the blade.
That is using the side of the blade that it is rotating away from you.
Bring the rip fence up flush against the side of the blade.
Always work to the right side of the blade during this type of cut.
Adjusting the laser line for the right side of the blade.
The LEFT side of the blade after the cut has been made.
Stand to either side of the blade.
Additional turbulence generating generators may be present at the pressure side of the blade.
Repeat this step on the other side of the blade tool being sharpened.
Tighten the locator screw and repeat on the left side of the blade.
Hands five inches on either side of the blade and you will be fine.
Push the workpiece with both hands one on each side of the blade.
Always be on the RIGHT side of the blade after the cut has been made.
Adjusting the laser line for the left side of the blade.
The sharp side of the blade 3 must face the disc.
Blades are easily replaceables by removing inserts on each side of the blade tubing.
The flat side of the blade shaft seal should face upwards fig . x.
Use the vice to secure your workpiece on one side of the blade only.
Each side of the blade has musical notations, making the most of the space.
In this picture taken from the side of the blade opposite that depicted.
There is a knife on the breadboard with butter on the right side of the blade.
Insert the non-serrated side of the blade into the upper.
Use your right hand to hold the workpiece to the right side of the blade.
Insert the non-serrated side of the blade into the upper holder and lower holder.
Blade angle measurements are the angles to which each side of the blade is sharpened.
The inscription on one side of the blade reads ' The blessing of the table.
You'll also be interested in:
Examples of using Side
Show more
Neither side fully respected the agreement
Attach foot with right side pin
Sit on the side of your bed or in a chair
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
