Examples of 'signal becomes' in a sentence
Meaning of "signal becomes"
signal becomes: This phrase suggests a transformation or change in a signal. It could indicate that a signal has evolved or altered in some way
How to use "signal becomes" in a sentence
Basic
Advanced
signal becomes
The signal becomes too thin to track.
Reduce the value until the feedback signal becomes unstable.
This signal becomes reset signal.
The threshold at which the encoded identification signal becomes perceptible.
The signal becomes too weak.
The relationship between the temperature and the output signal becomes a straight line.
An international signal becomes a voluntary language and alphabet.
Replace the batteries when the remote control display or transmission signal becomes weak.
The signal becomes weaker.
The attenuation is increased point by point and thus the output signal becomes smoother.
Signal becomes active.
The processed audio or signal becomes encoded to the remaining bits.
Inexperienced operators should continue to dig until the reason for the signal becomes clear.
So signal becomes weak.
It will switch back to DAB sound when the signal becomes strong again.
See also
If the stereo signal becomes to weak bad reception of the radio station.
This is the place of your home where the ISP signal becomes yours.
This means that the signal becomes bigger when both devices perform.
Automatically switch to FM broadcasting the same program if the DAB signal becomes weak.
This signal becomes constant when the substrate comes into contact with the spring.
When these nerves are damaged, the signal becomes distorted.
When that signal becomes red, all vehicles will stop.
If the two are far apart, the signal becomes wider.
However, as a stereo signal becomes weaker the audio signal will become poorer.
Therefore, the edge portion of the synchronizing signal becomes moderate.
In addition, the error signal becomes very small for small values of δf.
When the communication failure occurs, this signal becomes high level.
Furthermore, the signal becomes deteriorated after passing through three successive probes.
Therefore, the installation sensing signal becomes the ground signal.
The signal becomes red, because now there is a train occupying the circuit.
As a corollary to this, the scanning signal becomes progressively better defined.
This detected signal becomes a signal which indicates the rotation reference position of the reel 3.
Once on the other side, the signal becomes electrical again.
When the signal becomes strong enough, the unit automatically switches back to the stereo mode.
On the other hand, optical signal becomes weak over long distance.
In other words, the amount of the open signal of the pulse signal becomes small.
Consequently, the signal becomes more distorted and attenuated as it propagates to its destination.
When the scan has finished, the signal becomes audible again.
As a result, a temporal signal becomes a repetition signal corresponding to the length of the carrier interval.
When receiving over long distances, the signal becomes gradually weaker.
When the difference signal becomes larger, more input signal is steered to the rear.
When the input signal is true, the output signal becomes true.
This phase-shifted principal signal becomes the principal signal for the following stage.
With this interference, transmitting a high-speed test signal becomes more difficult.
The status signal becomes active and the core of the circuit 1 can not read the data.
As exocytosis increases ( left to right ) annexin signal becomes greater as the lysotracker signal decreases.
When the timer has timed five microseconds, the time out TIMOUTh signal becomes active.
Under very specific conditions, however, the photoacoustic signal becomes transiently negative, presumably reflecting oxygen uptake.
The signal becomes weaker . The batteries are exhausted.
When the transmission or receive signal has finished, the signal becomes audible again.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Becomes
Show more
A taken male instantly becomes an unavailable male
Becomes the everyday i know a tiny place
That is how one becomes a spiritual guide
