Examples of 'signal cable' in a sentence
Meaning of "signal cable"
signal cable: This phrase refers to a cable used to transmit signals between devices or components, usually in the context of electronics or telecommunications. Signal cables are used to carry audio, video, or data signals from one device to another, ensuring proper communication and functionality
How to use "signal cable" in a sentence
Basic
Advanced
signal cable
Compressor signal cable with poor contact.
Check the condition of the signal cable.
The signal cable is part of the supply.
Earth connection for signal cable screen.
Signal cable only in case of a separate system.
Check that the signal cable is connected.
Signal cable remote versions only.
Make sure that the signal cable is display.
The signal cable is not correctly connected.
Create a break in the signal cable shield conductor.
Signal cable remote version only.
Check the signal cable pins.
Signal cable should be completely attached to the computer.
Check it whether the signal cable is connected or loose.
Signal cable for unbalanced sources.
See also
Check that the signal cable is properly securely.
Improperly connected source signal cable.
Connect the signal cable to your flight controller.
Use well shielded signal cable.
Check if the signal cable of the monitor is disconnected.
Move the audio signal cable.
Lay the signal cable with fastening elements.
Connect to the video signal cable.
The signal cable is provided with the system.
Disconnect the power cable and signal cable.
Check the signal cable and replace if defective.
Connection and obtain the correct signal cable.
Replace the signal cable with anoder one.
Do not short the pins of the video signal cable.
Connect the signal cable correctly.
A signal cable is then connected from the first panel.
Make sure the video signal cable is connected properly.
Never yank or pull the antenna cable or signal cable.
Twenty miles of signal cable also had to be replaced.
Securely connect the power cord and signal cable.
Coal mine signal cable in european.
Characteristics of the signal cable.
Television signal cable distribution installation.
Do not pull or bend the power cable and signal cable.
Run the signal cable to the auxiliary monitoring device.
The layout of power cable and signal cable should be separated.
Put the signal cable into the first segment of tube.
This indicates that the video signal cable has been disconnected.
The video signal cable to display screen is unconnected or short circuit.
This control cable is used as a signal cable for the activation.
Check if the signal cable is correctly connected to the video card.
Connect the power cord and signal cable of the unit.
Keep the signal cable away from the others.
Turn off the monitor and unplug the signal cable.
Make sure that the signal cable is attached firmly.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
