Examples of 'signal is active' in a sentence
Meaning of "signal is active"
signal is active - used to indicate that a signal or communication channel is currently operational or functioning
How to use "signal is active" in a sentence
Basic
Advanced
signal is active
This signal is active if the string is ended.
Valid at all times while the signal is active on the input.
The signal is active.
A duty cycle is the percentage of one period in which a signal is active.
The error signal is active in the event of the following faults.
The POST also detects whether or not an external start signal is active.
This signal is active high to indicate when a conversion operation is active.
The description below focuses on what happens when the ENABLE signal is active.
Each address signal is active during two consecutive time slots.
In fact, the reinitialization order is present only if the request signal is active.
This signal is active high to request a five microsecond delay period.
The ZONE STATUS signal is active when.
This signal is active high when a five microsecond time delay has expired.
In addition, no more than one address signal is active at the same time.
This signal is active high when the five microsecond time delay has expired.
See also
In this case, this signal is active at a logic low.
This signal is active high to indicate when an auto-zero operation is active.
During initialisation, the feedback signal is active and corresponds to the input voltage.
This signal is active high when the AMUX register is written.
The output signal CD1 is set high if the selected input signal is active.
The ENABLE signal is active at the low level.
It therefore has the lowest priority when the PERSO signal is active ( high level ).
The EPMATHMARKEREP signal is active low indicates that the transmitter is on.
The descrambled data is selected if a descrambler enable ( DESCR EN ) signal is active.
The RSTWORD signal is active at the end of a message as will be discussed below.
The NUMFQW signal is a three-bit signal which is valid while the FIRST-QW signal is active.
This signal is active for as long as results come out at the output SRT.
When the application is open, the switch signal is active 1.
The TXOFF signal is active high and indicates that the transmitter is off.
But he 's not answering . The GPS signal is active.
TOHMI signal is active.
During the transmission phase, 22, V Enable signal is active.
This signal is active in the logic 1 state.
A suitable gain clock signal is active low and is approximately 15 microseconds wide.
This signal is active high to indicate when the current amplifier 90 is being auto-zeroed.
The ' Gas gone ' signal is active from the FPU ;.
This signal is active high when the auto-range state machine is not idle.
The clock counter signal is active in state S2 incrementing the count value by one.
This signal is active at the logic 1 value.
This signal is active high when the auto-zero state machine is not idle.
This signal is active high for three clock cycles and is active in state S4.
This signal is active high to shift the shift register and is active in state S3.
The MDDI Stb signal is active during the trestart-low period and the subsequent Sub-Frame Header Packet.
This signal is active high to increment the bias current counter 868.
This signal is active low when the voltage amplifier 80 has been auto-zeroed.
This signal is active as soon as the signal " NSYNMEM " is validated.
If no signal is active ( low ), the actuator moves in the CLOSE direction.
This signal is active low when the ICC 29 is transmitting a message.
When a signal is active ( high ), the actuator moves in the OPEN direction.
The ERSD signal is active for 87 clock cycles and inactive for 3 clock cycles.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Active
Show more
She had active orthodontic treatment as a teenager
Integral person member active in his environment
It has active community support and acceptance
