Examples of 'signal is at' in a sentence
Meaning of "signal is at"
signal is at - This phrase often implies the status or strength of a signal in a communication system or electronic device
How to use "signal is at" in a sentence
Basic
Advanced
signal is at
The transmitter signal is at its weakest in this direction.
Illuminates orange to indicate audio signal is at peak level.
The signal is at maximum gain.
Strength is an assessment of how powerful the received signal is at the receiving location.
This signal is at zero by default.
It also has the necessary amplification so the signal is at the right level.
The signal is at least a portion of the photometric transmission spectra.
The magnitude of the beat signal is at least equal to a threshold level.
Operating of the circuit in the case where the input signal is at low level.
The temperature measurement signal is at a different frequency than the generator signal.
You can see how accurate your GPS signal is at any time.
This intermediate signal is at least time reversed with respect to the received signal.
When the line is short, the received signal is at a high level.
You see, the signal is at the bottom of a cliff.
To tune, turn the tuning wheel until the signal is at its clearest.
See also
The power of the signal is at a minimum at the distance d 1.
Tuning - turn the tuning knob until the signal is at its clearest.
Thus, the reference signal is at a lower frequency than the phase clock.
When the display is blank, it means that the associated signal is at danger.
If the signal is at.
The method according to claim 16 wherein said phase correction signal is at a symbol level.
When the selection signal is at a low logic level,.
The first voltage signal is steady-state and the second voltage signal is at high frequency.
When a parity error signal is at logic 1, a parity error exists in the corresponding character code.
In a further embodiment, the third sound signal is at least partially ultrasound.
When this signal is at 1, the memory is active and write / read accesses can be performed.
During a period, the time duration during which the signal is at 1 is adjustable.
When the samp en signal is at logical level 1, the operation is performed.
When the signal is received and demodulated, the baseband signal is at the chip level.
A value of the data signal is at all times comprised between the curves 1 and 2.
The signal T commands the counter 5 when said signal is at zero.
In yet another embodiment, the ramp signal is at least a portion of a triangle waveform.
One sees that the corresponding short pulses arrive while the 32 millisecond signal is at 1.
The BW occupied by TV video signal is at least 4 MHz.
C-PICK reports signal is at Van Buren and LaSalle, now moving south again.
Zoo calling Dog Head, now the signal is at Chater Garden.
If the I / E signal is at the low level, the writing operation is enabled.
During this time, the MDDI Stb signal is at a logic zero level.
When this signal is at the logic level 1 ( potential VCC ), it is called inactive.
During the separation times between pulses, the signal is at the base level U 0.
When the control signal is at 0, the OUTPUT-INPUT connection is broken.
At this time, the ADS signal is at the " H " level.
The SLP1 signal is at logic low when memory device 100 is in the functional mode.
In one embodiment, the second signal is at a frequency of about 58 kHz.
Simultaneously, the ADVAL signal is at 1, thus indicating the success of translation.
There you go. You see, the signal is at the bottom of a cliff.
The output signal is at a typical level of + 17 dBm.
At this time, the ADS signal is at the " L " level.
Negative . The signal is at maximum gain.
In a bandpass EA ADC, the input signal is at an IF frequency instead of baseband.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
