Examples of 'signal is connected' in a sentence
Meaning of "signal is connected"
signal is connected - This phrase indicates that a communication signal or link has been established between devices or individuals
How to use "signal is connected" in a sentence
Basic
Advanced
signal is connected
The source signal is connected to the first panel.
Select the input line to which the source of the input signal is connected to.
The external input signal is connected to the inverting.
Autolock Allows to select an input only if a signal is connected.
This analog electrical signal is connected to a transmitter via a cable.
Be sure to set POWER SAVING to OFF when only the RGB signal is connected.
This signal is connected to the positive input of the secondary amplifier.
Is installed and reference signal is connected to AI1.
The audio signal is connected across the diode to achieve frequency modulation.
ON } - Set the display to display the image automatically once a signal is connected.
The local oscillation signal is connected to the couplers through a dividing module.
Sync LED, The LED will illuminate when the HDMI source signal is connected.
The error signal is connected to the frequency control input terminal of the oscillator.
You can only call the On-screen-display if a signal is connected to the VGA input.
The transmit signal is connected to either the first or the second row of coils.
See also
This setting can be adjusted when a computer signal is connected to INPUT1, INPUT2, or INPUT5.
Used A signal is connected to the input.
Further, a capacitor which short-circuits a beat signal is connected between the other end and a ground ( GND ).
This signal is connected to a first input of a third modulator 106.
The plenary session capture video signal is connected to a second capture inputs of DIGILAB SmartPlay.
This signal is connected directly to terminal 4 of connector Y02 of the operation interface unit AM904.
The decoupled fault current signal is connected to the comparing circuit 111.
Unused, No signal is connected to the input.
Rather, an HV latch signal is connected from the interfaz to a drawing block.
The lamp turns on when a DMX signal is connected always with the 10 second fixed delay.
The amplified video signal is connected to the inputs of the H - und V-sync detector circuits.
When the sync signal is connected to the HD / COMP IN connector.
The torque demand signal is connected to a motor controller 90.
The clock reference signal is connected to the header generator 204.
This pure sine wave signal is connected to a second input of third mixer 30.
The odd / even field signal is connected to one input of RS bistable latch 24.
This speed output signal is connected to a second input of the A.T. P.
This voltage output signal is connected with the comparators 14 and 16.
You'll also be interested in:
Examples of using Connected
Show more
You are directly connected to three different murders
Connected switch is offline or not operating properly
The audio cable is connected to the headset
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
