Examples of 'signal is fed' in a sentence
Meaning of "signal is fed"
The phrase 'signal is fed' is often used in the context of electronics or telecommunications. It refers to the process of inputting or supplying a signal (such as an audio or video signal) into a device or system for processing, transmission, or amplification. 'Signal is fed' implies that the signal is being provided to the device or system for further manipulation or utilization
How to use "signal is fed" in a sentence
Basic
Advanced
signal is fed
The difference signal is fed to the load.
This signal is fed with amplification and pulse generation to the emitter.
This button is ideal for testing if a DMX signal is fed to the DMX fixtures.
A line signal is fed directly ahead of the power.
The program signal portion of the television signal is fed to a television screen 21.
The other signal is fed directly to the phase detector.
For further automating the inspection process, the video signal is fed to a computer.
Otherwise the signal is fed directly on.
A signal is fed into the instrumentation amplifier and then into a second amplifier.
The model control set point signal is fed to an input of the composite model.
This signal is fed to the phase detector input of the phase lock circuitry.
When fully clockwise, the full input signal is fed to the input of the effect.
The output signal is fed to the transmitter for transmission to the receiver normal mode.
Pursuant to another embodiment, said collision detection signal is fed to a centralized collision detection device.
The stimulation signal is fed to a transmitter which emits a radio frequency signal.
See also
For splitting an incoming optical signal, the optical signal is fed into the upstream port.
The digital signal is fed into the signal.
This signal is fed back to the inverting input of the velocity control amplifier KV.
When Phono input is selected, your signal is fed directly to the high-quality RIAA.
The signal is fed to the antenna element 3.
If there is no slow down, a signal is fed to stage 6.
The descrambled signal is fed to a circuit designed to lengthen the zero level pulses.
The obtained decoded prediction error signal is fed to the adder 37.
Each base reference signal is fed to a cosine generator and a sine generator.
Bit 1 of the Johnson count inBitCount signal is fed to inverter 110.
This mixed signal is fed into the decision devices completing the feedback loop.
The regulation valve position signal is fed to summing point 53.
The DMX signal is fed to a transmitter which sends it via RF.
From the second output of coupler 14, the signal is fed to the input of detector 20.
The reflected signal is fed to the mixer, as any received signal would do.
When a trigger signal is generated, the trigger signal is fed to the monitor system 312.
The digital input signal is fed into a first memory which stores the input signal.
The scaled accumulated signal is fed into combiner 208.
The error signal is fed into a proportional compensator 36 which generates a control signal.
The converted electric signal is fed to the speaker 951.
The signal is fed from AFRTS in California, but local announcements can be inserted.
The resulting core decoded audio signal is fed to an M subbands complex QMF filter bank 72.
The signal is fed into the base of Q2 to maintain a proper impedance between circuits.
A proportion of the combined signal is fed to a PINFET photodiode receiver 22.
This signal is fed into some Analog-to-digital converters and a microcontroller runs a PID controller algorithm.
The selected optimal pulse signal is fed to the amplitude detecting circuit 34.
The highband signal is fed to a spectral whitening unit, which performs adaptive spectral whitening.
In Figure 1, the digital audio input signal is fed into the input terminal 100.
The resulting signal is fed through a comparator, where a pulse width modulated signal is generated.
A temperature indicating signal is fed to computer 40 by conductor 54.
The signal is fed to a computing unit ( not shown ) for computing the distance.
Upon activation, a request signal is fed to the position module 702.
This signal is fed back as a partial address to the unit 51.
Subsequently, the signal is fed to an envelope adjuster.
An AC signal is fed to the flame sense circuit by capacitor C8.
