Examples of 'signal is measured' in a sentence
Meaning of "signal is measured"
signal is measured - This phrase pertains to the process of quantifying or evaluating the strength, clarity, or quality of a signal in various contexts, such as telecommunications, electronics, or data transmission. It involves using specific instruments, devices, or methodologies to analyze and determine the characteristics or parameters of a signal, such as its voltage, frequency, bandwidth, or signal-to-noise ratio
How to use "signal is measured" in a sentence
Basic
Advanced
signal is measured
An abnormal endothermic signal is measured at high temperature.
A signal is measured at the outset of the amplification.
The time dependent bridge signal is measured.
A sensor signal is measured from a vibration sensor.
The first peak of the signal is measured.
A signal is measured at each reaction site.
A power level of the retrieved signal is measured.
The fluorescent signal is measured at regular intervals.
It is a reference point from which the signal is measured.
The fluorescence signal is measured by one single photodiode.
The duration of the period of the periodic signal is measured and.
The fluorescence signal is measured by a fluorescence slide scanner.
The sbp members are then activated and the resulting signal is measured.
Each signal is measured over a different time period.
A first electrode is connected to ground while a signal is measured at a second electrode.
See also
A signal is measured at certain times.
The amplitude of the reading signal is measured by means of an oscilloscope.
Variety also results from the point of connection at which a signal is measured.
The level of signal is measured periodically during the amplification.
Ethanol calibrators of known concentration are run and the resulting attenuated fluorescence signal is measured.
The resulting light signal is measured immediately in the luminometer.
Signal Ground It is a reference point from which the signal is measured.
The fluorescence signal is measured in counts per second cps.
The two-way travel time of the signal is measured.
The oxygen flow signal is measured by transmitters in the oxygen line.
On the contrary, these components are estimated as the signal is measured.
The quality of a received signal is measured by calculating the bit error ratio.
Thereafter, the response of the system to each reference signal is measured.
The actinometric signal is measured and plotted against the light dose.
As a receiver receives the transmissions, the quality of the received signal is measured.
The duration of the switch control signal is measured using a crystal oscillator.
This signal is measured at an IR absorbance peak of the selected analyte.
The arrival time of the radio signal is measured at each of three base stations.
The signal is measured as a read-out of the presence or amount of the analyte.
The average power of the combined signal is measured over a selected time period.
The PAT signal is measured from the fingertip by recording finger arterial pulsatile volume changes.
The MEASUREMENT signal is measured.
The signal is measured by an ELISA reader.
The method of claim 1, wherein the signal is measured by surface plasmon resonance.
During this non-dissipation excursion, the frequency of the electrical signal is measured.
The entropy of the restored signal is measured and used as a baseline in further measurements.
At each fixed interval, the amplitude of the corresponding signal is measured and deducted.
A second voltage of the signal is measured with respect to the second resistance value.
The direct current ( dc ) voltage of the pulse width modulated signal is measured using a voltmeter.
At least one electrochemical signal is measured based on a reaction taking place at the cell.
Alternatively, a single transceiver may be used for transmitting and receiving, where a reflected signal is measured.
The RMS energy in the residual signal is measured and compared to a predetermined threshold value.
In all cases, the duration of N s periods of the modulated signal is measured.
The light output signal is measured within 5 minutes.
For a Brillouin oscillation zone, the period of oscillation of the signal is measured.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Measured
Show more
The measured values shall be plotted on a graph
Asteroid composition is measured by radar and seismometry
You measured right up to him this afternoon
