Examples of 'signal search' in a sentence
Meaning of "signal search"
Signal search: This phrase is used to describe the act of sending out a sign, indication, or communication in order to initiate a search, locate something, or attract attention
How to use "signal search" in a sentence
Basic
Advanced
signal search
Signal search fine search pinpointingcoarse search.
To enable and force a signal search.
Execute signal search command of satellite position.
I hypothesized that the routine signal search corresponds to this aim.
The signal search refers to the process of establishing a search pattern and looking for a signal.
Means to initiate a reference signal search by the position receiver.
The original feature of the ACELP coder lies in the excitation signal search module.
Resume your signal search at the point where it was originally abandoned.
Move through the presumed search area to pick up the first signal search strip width.
Manually forcing another signal search will consume more battery power.
To adjust the alarm clock and the alert, to trigger the RCC signal search.
Begin your signal search for the victim using your avalanche beacon.
Refer to Figures C to establish a signal search pattern.
Perform a manual DCF signal search at the weather station or second receiver unit.
The flowchart of Figure 5 shows the operation of the signal search routine of Figure 4.
See also
Otherwise, start your signal search at the top, bottom or side of the slide path.
Rotate the Tracker slowly in all directions ( Figure D ) while moving along your signal search pattern.
After the signal search is completed, the monitor displays all existing devices once more.
Touch MODE / - to force another signal search.
The signal search will take approximately 10 seconds.
Then press and hold MODE / - to force a signal search.
Signal search path with multiple searchers slide wider than 40 meters.
Figure 5 shows the operation of the signal search routine of Figure 4.
Signal search path with one searcher slide wider than 40 meters.
Press + / ST / SP twice to skip heart rate signal search and start stopwatch.
Force a signal search see " Signal Search " section.
Step 202 determines if it is time to perform a signal search.
Then in step 210 the signal search routine is executed.
Then touch MODE / - to select “ EXE ” and force another signal search.
In order to check whether the radio signal search was successful, press button 1 now.6.
Upon returning from the signal search routine, step 216 checks if signal was found.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Search
Show more
Does not make the search less important
Search for the sensor or check batteries
Expand the search to the east coast
