Examples of 'slave flash' in a sentence
Meaning of "slave flash"
A slave flash refers to an external photographic flash unit that is wirelessly triggered by another flash source. It 'slaves' off the primary flash, synchronizing its own flash firing with the master flash. This allows for multiple flash units to be used simultaneously without the need for direct connections, enabling more creative lighting setups in photography
How to use "slave flash" in a sentence
Basic
Advanced
slave flash
Position the slave flash unit accor.
Configuration procedure for remote slave flash mode.
Remote slave flash mode settings.
Setting procedure for remote slave flash mode.
Place the slave flash units in the desired.
You can also emit the flash wirelessly as a slave flash.
A slave flash is also important.
Use flash unit mounting foot to set up the slave flash unit.
The slave flash units will respond with a test flash.
Each group can in turn consists of one or more slave flash units.
Place the slave flash units in the desired positions for.
With the actual distance from the slave flash to the subject.
Place the slave flash units in the desired positions for the shot.
Setting the flash mode for the slave flash unit on the master.
The slave flash units must be working in TTL mode.
See also
Manually set the same value for the auto working aperture on the slave flash unit.
Samsung The remote slave flash mode is not supported by Samsung cameras.
Now, aperture value and film speed are automatically transmitted to the slave flash unit.
The slave flash units respond with a test flash, if supported by the camera.
Afterwards, wireless remote control of one or more slave flash units by a master flash unit.
The slave flash units will respond in succession, according to slave group, with a test flash.
It can also function in the conventional RC mode ( optical communication ) as a slave flash.
Wait until the slave flash unit and the camera 's controller flash unit are ready.
Take a test shot and check whether the slave flash unit ( s ) respond.
Once the slave flash unit is ready, its AF measuring beam.
A flash unit stand S60 ( accessories ) should be used when setting up the slave flash unit.
A slave flash unit can be assigned to two of three possible slave groups RMT, RMT2.
Use flash unit mounting foot S60 ( optional accessories ) to set up the slave flash unit.
Once the slave flash units are flash ready, the AF auxiliary ligh will blink.
Setting the Slave Flash unit ( s ) for firing 1.
The slave flash unit is assigned to one of two possible groups RMT or RMT2.
Once the slave flash units are flash ready, the AF measuring beam will blink.
Once the slave flash units have achieved flash-readiness, the AF measurement flash flashes.
