Examples of 'slave unit' in a sentence
Meaning of "slave unit"
slave unit: This phrase may refer to a group of enslaved individuals or a system of slavery
How to use "slave unit" in a sentence
Basic
Advanced
slave unit
A remote is a slave unit that needs a master.
The latter therefore behaves as a slave unit.
Place the slave unit in the desired location.
Perform field setting for the slave unit.
Other slave unit combinations are contemplated.
Repeat for each slave unit.
Slave unit with measuring means.
Changing the master unit into a slave unit.
Now the slave unit follows the master unit.
Wireless flash slave unit.
Slave unit assessment to follow.
The tester is a slave unit.
A slave unit emulates the timing of the master unit.
This retransmission is received and acknowledged correctly by the slave unit.
Each slave unit is thereby associated with a unique address.
See also
When the transceiver is acting as a slave unit the reverse is true.
Now the slave unit will follow the master unit.
This enables a secure discrimination between a master unit and a slave unit.
The slave unit also sends an echo of the local address.
Install a new operating system and reconnect the old drive as a slave unit.
The slave unit may exhibit various output type functions.
This means that we will have a master and at least one slave unit.
A slave unit is susceptible of being paged when it is in the page scan mode.
Next the operations of a slave unit will be explained with reference to fig.
A slave unit may remain in the low power mode except when transmitting or receiving.
The movement sensor of the slave unit detects activity in the coverage area.
Perform the following procedures when setting the master and slave unit separately.
The slave unit will follow in sequence with the master unit.
Detach remote controller from the master unit and connect it to the slave unit.
The master unit and slave unit can be selected in various ways.
Perform the following procedure when setting the master and slave unit separately.
The master unit and the slave unit communicate vÃa a communications interfaz.
Disconnect the remote controller from the master unit and connect it to the slave unit.
Now the slave unit follows the master unit according to the setting.
Disconnect the user interface from the slave unit and reconnect it to the master unit.
Each slave unit responds to the master unit by generating a current pulse representing its state.
The free bits then serve to synchronize the responses of the slave unit over time.
This allows a slave unit to fail or become unpowered without disabling the communication.
This reduces a time for determining whether its own unit is a master unit or a slave unit.
A parked wireless slave unit is also assigned a unique response number by the master.
Operation with DMX controller or operation as a slave unit.
The identifier of the slave unit then comprises the class code and the suffix.
Flash used at a distance from the camera is called Slave unit.
Do not place the slave unit within the Picture area.
The Standby Amplifiers can be interfaced as a slave unit.
Link the slave unit and the master unit via DMX cable.
The Slave Controller unit functions only to control the slave unit.
Connect the slave unit between SL on the master unit and on the slave unit.
We rig an antenna on this, we got a slave unit.
In the example slave unit 6 may be active at any slot.
You'll also be interested in:
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
Examples of using Slave
Show more
I would be your slave if you let her go
We slave away and get beatings anyway
You have made a slave of your sister
