Examples of 'slide the wheel' in a sentence
Meaning of "slide the wheel"
This phrase is not commonly used in English and does not have a clear meaning. It could be a literal reference to sliding a steering wheel or a metaphorical expression with a specific context
How to use "slide the wheel" in a sentence
Basic
Advanced
slide the wheel
Slide the wheel collar on the axle.
Lift up on tab underneath rear axle as shown and slide the wheel off.
Slide the wheel onto the axle.
Evenly distribute the grease and slide the wheel back onto the shaft.
Slide the wheel pant into position.
Position front wheel between forks and slide the wheel onto the fork.
Slide the wheel tenderly to avoid damage.
Install the retainer through the wheel center and slide the wheel under the vehicle.
Slide the wheel collar on the wire.
After greasing the bearing, slide the wheel into place.
Slide the wheel to the desired position.
To remove swivel wheels, press locking tab and slide the wheel off the leg.
Slide the wheel pant on the landing gear.
Depress release button on wheel hub, slide the wheel all the way onto axle.
Slide the wheel on the tail gear wire.
See also
Remove cap C, loosen the screws d, slide the wheel pin out and remove the front wheel.
Slide the wheel forward to loosen the chain.
Continue to slide the wheel axle through the wheel.
Slide the wheel rearwards to tighten the chain.
You can slide the wheel against the wall while holding on to either side.
Slide the wheel hub onto the wheel axle.
Slide the wheel collar on the landing gear axle.
Slide the wheel pant and wheel into position.
Slide the wheel fully inward on the wheel shaft.
Slide the wheel bracket assembly all the way down.
Slide the wheel pant and wheel on the landing gear.
Slide the wheel axle pin through the hole located in the centre.
Slide the wheel forward in the dropouts until the wheel can be removed.
Slide the wheel pant spacers against the inside edges of the wheel pant.
Slide the wheel upwards and press until the wheel clicks into position.
Slide the wheel then large washer onto the axle and hold in place with the.
Slide the wheel collar against the bracket and tighten the setscrew to secure the collar.
Slide the wheel in to position, then the outer wheel collar.
Slide the wheel into position, sliding the screw through the wheel.
Slide the wheel unto the axle while keeping pressure on the button 2.
Slide the wheel on the axle, then secure it using a wheel collar and setscrew.
Slide the wheel to the right, enough to clear the curb and balance the unit.
Slide the wheel on the axle, then secure it using another wheel collar and setscrew.
Slide the wheel on the wire, then the plastic wheel collar and a wheel pant spacer.
Slide the wheel bracket assembly down for shallower penetration, and up for deeper tine penetration.
Slide the wheel to re-tension the chain, and center the wheel in the frame.
Slide the Wheel Axle ( B ) through the square tube at the rear of unit.
Slide the wheel set ( 8 ) on the holder on the cutting.
You'll also be interested in:
Examples of using Slide
Show more
A slide and video presentation not to be missed
Sometimes they slide to the other side
Slide the splitter as far down as it will go
Examples of using Wheel
Show more
The tiny wheel actually does have chores
He could barely see over the wheel
Wheel bearings are clean and free of moisture
