Examples of 'slip ratio' in a sentence
Meaning of "slip ratio"
slip ratio - a term used in engineering or mechanics to describe the difference between the speeds of two surfaces in contact, often related to friction
How to use "slip ratio" in a sentence
Basic
Advanced
slip ratio
There are a number of correlations for slip ratio.
It is better to reduce the slip ratio as quickly as possible.
There is no universally agreed upon definition of slip ratio.
The slip ratio is calculated by.
Longitudinal slip ratio.
Slip ratio per cent.
This curve presents a maximum of adhesion u max for an optimal slip ratio s opt.
The slip ratio.
Each ABS control process includes a correction process that changes the target slip ratio.
The slip ratio can be calculated with the following equation.
By definition, t corresponds to the longitudinal slip ratio.
The set slip ratio normally varies depending on a vehicle speed or velocity.
When accelerating out of a turn, it keeps the tires at optimal slip ratio.
That is, the slip ratio of the wheel increases.
Fig . 8 is a graph showing one example of the target slip ratio table.
See also
That is, the slip ratio of the wheel decreases.
FIG . 5 is a view for describing the relationship between a slip ratio and a vehicle speed ;.
That is, the target slip ratio of the first wheel is small.
Slip ratio “ s ” at these same moments.
In this case, the target slip ratio is inhibited as the bank angle increases.
The index shows the wear amount at a 60 % slip ratio.
Thus, the target slip ratio is easily set in a short period of time.
The greater the severity, the greater the slip ratio and the friction energy.
When the target slip ratio decreases, the brake force supplied to the wheel decreases.
That is, the target slip ratio is small.
The slip ratio “ s ” is representative of the operational conditions of the plane 's braking system.
In the present example, the target slip ratio in the antilock brake operation is constant.
Wheel lock " means the condition that occurs when there is a slip ratio of 1.00.
Therefore, the target slip ratio is set smaller than the current slip ratio.
Fig . 31 is an S-µ curve showing the relationship between slip ratio and friction force ;.
Step S77 judges whether the slip ratio has at least a predetermined value or not.
Fig . 15 is a graph showing a relation between the slip ratio and virtual roller shaft torque.
Preferred Slip Ratio to prevent flap pull back is greater than 10.
Mean Std-deviation Slip ratio per cent.
Further, a slip ratio ( λ ) at this time is computed.
As described above, the target slip ratio table is stored in the ROM 62 of Fig . 3.
You'll also be interested in:
Examples of using Ratio
Show more
Gross enrolment ratio at secondary level percentage
Ratio of owned versus leased office space
See proper dilution ratio instructions on bottle
Examples of using Slip
Show more
Staple sales slip or cancelled check here
Slip mat above the dust cover
Maybe we would slip by them in the dark
