Examples of 'slot width' in a sentence
Meaning of "slot width"
slot width - Slot width refers to the measurement of the opening or gap in a slot or groove. It is the distance between the two edges or boundaries of the slot, which is often crucial in determining compatibility or fitting of objects within the slot
How to use "slot width" in a sentence
Basic
Advanced
slot width
In the example illustrated it is two thirds of the slot width.
Inch slot width.
The width of the cast film web is determined by the die slot width.
Blowing slot width.
The slot width is slightly greater than the thickness of the roof skin.
There is a certain limitation on the slot width of the automatic embossing machine.
The ring slot width is more important as the flow rate is high.
The width DE is significantly less than the longitudinal slot width Ds.
The ring slot width is the second most important factor.
Good transmission results were obtained with a slot width of 1 mm.
Milling a guide slot slot width larger than the tool diameter.
Advantageously the method wherein the bend slot width is,.
Slot milling the slot width is the same as the tool diameter.
In addition, there is a high interaction between flow rate and ring slot width.
The optimum slot width is close to the value given by the equation.
See also
The milling tool 3 should be selected with a thickness corresponding to the desired slot width.
Accordingly the size of the slot width d should be kept securely below this critical point.
The área reduction is accomplished by reducing the capillary OD and slot width ( W ).
In the graph this maximum slot width is represented by a first vertical line B.
The longitudinal slot 52, as manufactured and before further assembly, has a predetermined slot width configuration.
The slot width of the all-around side screens was changed slightly.
Guide-groove milling the slot width is greater than the tool diameter.
Mm slot width is perfectly suited for the use of our U-clamp with hammerhead foot.
In fact, the adjustment of the slot width enables adjustment of the antenna impedance.
The longitudinal slot 32 has a longitudinal slot width DS.
The aperture 36 can have a slot width and a shape selected to accommodate the elastic member.
Can be slotted into C profile rails with slot width 11 mm.
The grid should have such a slot width that the carrier elements 25 can not pass therethrough.
Slot width is generally in the range between about 0.5 and 3 mm.
This means that the slot width must be set to 40 mm.
The clips are designed for usage with C-profile rails, 11 mm slot width.
The purpose of this region of reduced slot width 14 will be explained below.
A minimum slot width in the order of 0.05mm has been found appropriate.
Compact double-slot toaster, 32 mm slot width and automatic centring.
Upper drive ring 10 Adjust the slot width by moving the cutting discs between the spacers 11.
Optimally, the preselected slot width at the lock-out position 56 is zero.
