Examples of 'sodium bisulfate' in a sentence
Meaning of "sodium bisulfate"
sodium bisulfate: A chemical compound often used in industries like food production, cleaning products, and water treatment for its acidic properties and oxidative capabilities
Show more definitions
- The inorganic compound NaHSO₄, used primarily to lower pH.
How to use "sodium bisulfate" in a sentence
Basic
Advanced
sodium bisulfate
Sodium bisulfate is the preferred catalyst.
How to lower pH with sodium bisulfate.
Sodium bisulfate was added to the reaction solution and filtered.
Potassium bisulfate and sodium bisulfate are the preferred salts.
Examples of antioxidants that may be used include sodium bisulfate.
This is because sodium bisulfate catalyses deamination of unmethylated cytosine to uracil.
Antioxidants include sodium bisulfate.
Sodium bisulfate can be made by further reacting the bisulfite with an oxidant.
The tablet comprises sodium chlorite and sodium bisulfate.
Inorganic acids such as sodium bisulfate reduce water pH without tainting the water.
Chlorine dioxide generated from sodium chlorite and sodium bisulfate.
Sodium bisulfate is the main component in dry acid bath formulations for metal cleaning.
Rhodium is separated from the residue by treatment with molten sodium bisulfate.
QMSP uses sodium bisulfate to convert unmethylated cytosine to uracil.
Stabilizing agents such as ascorbic acid or sodium bisulfate may also be employed.
See also
Sodium Bisulfate works particularly well with glyphosate herbicides to enhance their effectiveness.
Chlorine dioxide generated from sodium chlorite and sodium bisulfate and hydrochloric acid.
Sodium Bisulfate acidifies a grout formulation to form a temporary seal while constructing underground tunnels.
Alternatively, the acid component may be sodium bisulfate.
A comparison of sodium bisulfate treated and untreated DNA provides for the detection of methylated cytosines.
Sulfur trioxide can be prepared in the laboratory by the two-stage pyrolysis of sodium bisulfate.
Appropriate amounts of sodium bisulfate as indicated in Table II were measured.
Typical preferred examples of each are citric acid, acetic acid anhydride, and sodium bisulfate.
The size range of the sodium bisulfate was an average of 8 microns.
Sodium bisulfate is also useful in metal finishing, in cleaning and as a pickling agent.
Antioxidants preferably include ascorbic acid, sodium bisulfate and any combinations or mixtures thereof.
Typically, sodium bisulfate is included in the solid rinse aid composition as an acid source.
After one hour, the reaction was quenched with aqueous sodium bisulfate and potassium carbonate.
For this reason, sodium bisulfate is sometimes chosen for pH-lowering applications.
The new formulation contains three components, lithium hypochlorite, sodium bisulfate and sodium chlorite.
The sodium bisulfate had an average size of eight microns with a top size of 20 microns.
The pH was adjusted to between 4-5 with sodium bisulfate monohydrate and concentrated.
When the sodium bisulfate reacts with the calcium carbonate, sodium sulfate is co-produced.
The filtrate was collected and treated with 10 % sodium bisulfate solution.
Examples include sodium bisulfate and ammonium persulfate, sodium thiosulfate and potassium persulfate, and the like.
The reaction mixture is then cooled to room temperature and acidified with 10 % sodium bisulfate.
Ethylene chloride and 1 N sodium bisulfate were added to the reaction mixture.
Sodium bisulfate ( 6 g ) was added to the reaction mixture and filtered.
To the reaction mixture was added sodium bisulfate ( 15 g ) and the resultant was filtered.
Sodium bisulfate ( the common name for sodium hydrogen sulfate ).
The mixture was filtered and sodium bisulfate was added until the solution was acidic ( pH 3 ).
Sodium bisulfate and with brine, dried over sodium sulfate, and concentrated.
After stirred for 15 min, the mixture was vigorously stirred by addition of sodium bisulfate monohydrate.
The sodium bisulfate was ground to a size which passed through a 325 mesh screen.
Preferably, the second reactive chemical is citric acid, acetic acid, acetic anhydride, or sodium bisulfate.
Aqueous sodium bisulfate was added ( final pH 5 ) and the aqueous layer was extracted with dichloromethane.
Time to 50 % hydration was recorded for several levels of CSA and sodium bisulfate as follows,.
Glucomo-δ - lactone, sodium bisulfate and / or sodium bisulfite may be used instead of the acid.
After stirring for 60 h the mixture was partitioned between ethyl acetate and a 1M sodium bisulfate solution.
Solutions of sodium bisulfate are acidic, with a 1M solution having a pH of around 1.
You'll also be interested in:
Examples of using Sodium
Show more
Ammonia and sodium hypochlorite hook up at a bar
You need to watch your sodium levels
Sodium nitrate and potassium nitrate mixture
Examples of using Bisulfate
Show more
The bisulfate salt having the formula
This colorless solid is the caesium salt of bisulfate
Bisulfate ion becomes the nucleophile at high acidity
