Examples of 'sodium hydroxide aqueous' in a sentence
Meaning of "sodium hydroxide aqueous"
sodium hydroxide aqueous: Refers to a solution where sodium hydroxide is dissolved in water
How to use "sodium hydroxide aqueous" in a sentence
Basic
Advanced
sodium hydroxide aqueous
The cooled mixture is poured in a normal sodium hydroxide aqueous solution.
A sodium hydroxide aqueous solution or a potassium hydroxide aqueous solution is used as the alkaline solution.
The alkaline solution is preferably a sodium hydroxide aqueous solution or a potassium hydroxide aqueous solution.
The following step of decarboxylation was carried out by treatment with a sodium hydroxide aqueous solution.
Sodium hydroxide aqueous solution and sodium sulfate were added to the reaction liquid and filtered.
The obtained solution was neutralized by adding a sodium hydroxide aqueous solution and an ether thereto.
MM sodium hydroxide aqueous solution.
Examples of alkali solutions include ammonia water solutions and sodium hydroxide aqueous solutions.
Specifically, a sodium hydroxide aqueous solution is used.
The aqueous layer was adjusted to pH 9 with a sodium hydroxide aqueous solution.
After cooling, sodium hydroxide aqueous solution was added to make the reaction mixture basic.
The hydrochloric acid extract turned alkaline with 2n - sodium hydroxide aqueous solution.
It was washed with a 2N sodium hydroxide aqueous solution and dried on anhydrous sodium sulfate.
More specifically, examples of the alkaline electrolyte solution include a sodium hydroxide aqueous solution.
A 1N sodium hydroxide aqueous solution was further added, and extraction was performed with methylene chloride.
See also
sodium hydroxide
sodium hydroxide and potassium hydroxide
sodium hydroxide aqueous solution
sodium hydroxide is added
sodium hydroxide and potassium hydroxide
sodium hydroxide aqueous solution
sodium hydroxide is added
The exhaust gases were treated with 4N sodium hydroxide aqueous solution.
Alternatively, sodium hydroxide aqueous solution can be used as a substitute for the NH4OH aqueous solution.
LAS-Na was used in solution condition, which was neutralized with sodium hydroxide aqueous solution.
Then . 5 % sodium hydroxide aqueous solution was added for neutralization.
Comparative Example 6 Carbon dioxide absorption was carried out using a sodium hydroxide aqueous solution.
To the filtrate was added a 20 % sodium hydroxide aqueous solution to effect partition.
A 20 % sodium hydroxide aqueous solution was added to the precipitate, followed by heating under reflux overnight.
The residue was dissolved in a 1 N sodium hydroxide aqueous solution.
In turn, a 2 % sodium hydroxide aqueous solution was added to the organic layer.
The reaction solution was further washed with MTBE, a 1 N sodium hydroxide aqueous solution and water.
With a sodium hydroxide aqueous solution and then extracted with 200 ml of chloroform.
Thc solution was made alkaline with a 20 % sodium hydroxide aqueous solution while cooling.
MM sodium hydroxide aqueous solution, 1M sodium chloride aqueous solution.
The effluent is treated with a 20 % sodium hydroxide aqueous solution and then with water.
Synthesis Example 1 Nine grams of glycine were dissolved in 60 ml of a 2N sodium hydroxide aqueous solution.
By adding 10 ml of a 1 M sodium hydroxide aqueous solution, ethanol was evaporated under a reduced pressure.
The recovered supernatant liquor was adjusted to a pH of 8.0 with a 1N sodium hydroxide aqueous solution.
A sodium hydroxide aqueous solution was added thereto for adjustment to pH 13.0.
The mixture was then neutralized with the 20 % sodium hydroxide aqueous solution and mixed until uniform.
Then, 5 ml of 5 % sodium hydroxide aqueous solution was added for neutralization.
Thereafter, the solution was rendered pH 12.0 by sodium hydroxide aqueous solution.
To this solution, 2N sodium hydroxide aqueous solution ( 5 ml ) was added at room temperature.
The pH of the mixture is adjusted to 11 with 50 % sodium hydroxide aqueous solution.
Cc of a 0.1 N sodium hydroxide aqueous solution is added and stirred with a stirrer for 15 minutes.
The aqueous layer was adjusted to pH 9 with a 5N sodium hydroxide aqueous solution, followed by filtration.
Thereafter, 10 N sodium hydroxide aqueous solution was added to adjust pH to 13.
NaOH treatment The ion-exchange resin, product is held in a sodium hydroxide aqueous solution of about 0.1N.
The solution was washed sequentially with a 5 % sodium hydroxide aqueous solution, diluted hydrochloric acid and water.
To the aqueous layer was added 1N sodium hydroxide aqueous solution till pH became 12.
Most preferred is 25 wt % sodium hydroxide aqueous solution.
Further, 34 parts by weight of a 48 % sodium hydroxide aqueous solution was added for neutralization.
To the mixture was added 15.1 g of a 20 % sodium hydroxide aqueous solution while stirring at room temperature.
To the obtained residue was added an 2N sodium hydroxide aqueous solution ( 1 liter ).
You'll also be interested in:
Examples of using Sodium
Show more
Ammonia and sodium hypochlorite hook up at a bar
You need to watch your sodium levels
Sodium nitrate and potassium nitrate mixture
Examples of using Hydroxide
Show more
Sodium hydroxide and water for injections
The minus log of the hydroxide concentration
Sodium hydroxide can also be independently produced
Examples of using Aqueous
Show more
Aqueous suspension filled into the box
Not restricted aqueous solution very low
In aqueous solution potassium lye or liquid potassium
