Examples of 'sodium hydroxide solution was added' in a sentence
Meaning of "sodium hydroxide solution was added"
sodium hydroxide solution was added - This phrase indicates a scientific procedure in which a solution containing sodium hydroxide was included
How to use "sodium hydroxide solution was added" in a sentence
Basic
Advanced
sodium hydroxide solution was added
Sodium hydroxide solution was added to control the pH.
The solvent was evaporated and sodium hydroxide solution was added.
Sodium hydroxide solution was added and mixed well into both mixtures.
After cooling, an aqueous sodium hydroxide solution was added to neutralize.
A sodium hydroxide solution was added to the mixture at O°C until the mixture was basic.
After cooling to room temperature 1N aqueous sodium hydroxide solution was added.
Aqueous sodium hydroxide solution was added until the mixture reached basic pH.
The reflux temperature dropped to 79 °C after all the sodium hydroxide solution was added.
Additional sodium hydroxide solution was added as needed to push the hydrolysis to completion.
The reaction solution was poured into ice and a 2 M sodium hydroxide solution was added at 0°C.
The sodium hydroxide solution was added to the stirred reaction mixture over a fifteen minute period.
Further, 8 g of 23 % by weight aqueous sodium hydroxide solution was added thereto to stir.
Aqueous sodium hydroxide solution was added to the reaction mixture, which was then stirred.
While stirring, the aqueous sodium hydroxide solution was added to the contents of the flask.
The sodium hydroxide solution was added to the reaction vía pipette over a 2 minute period.
See also
sodium hydroxide or potassium
sodium hydroxide solution
sodium hydroxide was added
sodium hypochlorite
sodium hydroxide solution
sodium hydroxide was added
sodium hypochlorite
To this, 3 mL of 1N sodium hydroxide solution was added.
The sodium hydroxide solution was added dropwise to the chromium-leucine solution with stirring.
After cooling, aqueous sodium hydroxide solution was added to the mixture and alkalized.
The sodium hydroxide solution was added dropwise to the chromium-methionine solution with stirring.
About 5 mℓ of a 1 N sodium hydroxide solution was added thereto to adjust the pH to about 7.
A sodium hydroxide solution was added to a pH of 5.2 to precipitate a yellow iron oxyhydroxide.
Further, 45 % by weight aqueous sodium hydroxide solution was added thereto to adjust to pH 8.
Sodium hydroxide solution was added to bring the pH between 6 and 7.
Thereafter, 5.16 ml of a 5 N sodium hydroxide solution was added dropwise at room temperature.
Sodium hydroxide solution was added ( pH = 7 ) and the mixture extracted with ethylacetate.
The reaction was cooled, and the sodium hydroxide solution was added dropwise at 28°C over 10 minutes.
Sodium hydroxide solution was added and soaking carried out for 2 h at pH 9.2.
A 1 mol / L aqueous sodium hydroxide solution was added to the reaction mixture.
A sodium hydroxide solution was added to the thus-obtained eluate to thereby adjust pH to 2.5.
An aqueous 10 % sodium hydroxide solution was added thereto.
The sodium hydroxide solution was added to the reaction vía a syringe pump over a 2.5 hour period.
After 1 h the remaining sodium hydroxide solution was added at rate of 0.8 mL / minute.
A 1N sodium hydroxide solution was added to the residue, to thereby make the mixture alkaline.
An ice-cooled 0.5 N sodium hydroxide solution was added to the residue.
A 3 % sodium hydroxide solution was added to the vortex of the starch slurry.
A 4N aqueous sodium hydroxide solution was added to neutralize the aqueous layer.
A 36 % sodium hydroxide solution was added until the reaction mixture reached a pH of 11.
If necessary, 1N sodium hydroxide solution was added to readjust the pH to the target value.
Aqueous 3N sodium hydroxide solution was added and the organic phase collected.
An aqueous 40 % sodium hydroxide solution was added in an amount sufficient to provide a pH of 1.
In turn, a 2 % sodium hydroxide solution was added to the organic layer.
Aqueous sodium hydroxide solution was added until the pH of the aqueous layer reached pH11.5.
A 1 M aqueous sodium hydroxide solution was added thereto under ice-cooling, followed by extraction with chloroform.
Then 1N aqueous sodium hydroxide solution was added dropwise while maintaining the temperature below 15°C.
An aqueous 47 % sodium hydroxide solution was added to obtain pH of 3.
You'll also be interested in:
Examples of using Sodium
Show more
Ammonia and sodium hypochlorite hook up at a bar
You need to watch your sodium levels
Sodium nitrate and potassium nitrate mixture
Examples of using Solution
Show more
One proposed solution is sustained livelihood programmes
Find a ripe moment to propose solution or option
There is now a solution to most of these problems
Examples of using Added
Show more
I added some extra layers for fullness
New reports will be added as they are published
He added a number of other minor editorial changes
Examples of using Hydroxide
Show more
Sodium hydroxide and water for injections
The minus log of the hydroxide concentration
Sodium hydroxide can also be independently produced
