Examples of 'solid lubricating' in a sentence
Meaning of "solid lubricating"
solid lubricating: This phrase refers to a type of lubrication method where a solid material is used to reduce friction between two surfaces
How to use "solid lubricating" in a sentence
Basic
Advanced
solid lubricating
Grams of solid lubricating powder of stearate type.
They were both overlaid with a solid lubricating coating.
A solid lubricating material can be cast in sheet form.
Thickness of solid lubricating glass.
Solid lubricating additives are just those suggested by the common practice.
The lubricant may be any normally livid or solid lubricating material suitable for the purpose.
This type of solid lubricating coating is preferably formed on the surface of a box.
A liner assembly according to claim 1, characterized in that the solid lubricating material is a lubricating polymer.
The binder of the solid lubricating coating is a material having the ability to form a film.
A thickness of greater than 40 micrometers may decrease the adhesion of the overlaid solid lubricating coating.
The preferred solid lubricating filler and preferred plasticizer are magnesium stearate and castor oil respectively.
By inactivation-treated, safety of a solid lubricating film can be further enhanced.
Thereafter, a solid lubricating coating having a thickness of 27 micrometers was formed on the lower layer.
Such lubricating liner assembly 30 includes at least one substantially flat solid lubricating material 24.
At least one solid lubricating filler, and.
See also
The mass ratio M of molybdenum disulfide to polyamide-imide resin in the solid lubricating coating was 1:1.
Grams of solid lubricating powder of stearate type, and.
The mass ratio M of graphite to epoxy resin in the solid lubricating coating was 1:1.
The thickness of the solid lubricating coating is preferably at least 5 µm.
Comparative Example 5 is inferior in lubricity because it does not contain the solid lubricating component ( C ).
In contrast, a solid lubricating coating is free from these problems.
The mass ratio M of molybdenum disulfide to furan resin in the solid lubricating coating was 0.3:1.
Preferably, such solid lubricating material is a polymer type lubricant.
The mass ratio M of molybdenum disulfide to epoxy resin in the solid lubricating coating was 0.7:1.
The composition of the solid lubricating coating-forming composition ( on mass % basis ) was as follows.
By this treatment, safety of a solid lubricating film can be further enhanced.
Preferably the solid lubricating coating has a thickness in the range of from 5 to 40 micrometers.
The thickness of the solid lubricating coating is more preferably in the range of 15 - 40 micrometers.
You'll also be interested in:
Examples of using Lubricating
Show more
I am gonna get some lubricating eye drops
Before lubricating the chain clean it carefully
Follow instruction for lubricating and changing ac
Examples of using Solid
Show more
Solid shaft for separate shaft coupling
Now there will be a solid bond between us
Get to solid ground or shallow water if possible
