Examples of 'solids level' in a sentence
Meaning of "solids level"
solids level: potentially indicating the concentration, amount, or quality of solids present in a substance or environment
How to use "solids level" in a sentence
Basic
Advanced
solids level
The solids level here is then reduced to almost zero.
This is continued until the desired solids level is achieved.
A higher polymer solids level will increase the need for surfactant.
From the latter two readings a percentage pad solids level is determined.
In addition the dissolved solids level in the discharged water would be increased.
The polymerization was allowed to continue until the latex reached a constant solids level.
The solids level in the tank is slowly increased over time as slurry viscosity increases.
The type and concentration of surfactant are typically dependent on the polymer solids level.
This preferably has the maximum solids level which can be employed for ease of processing.
The type and concentration of surfactant is typically dependent on the polymer solids level.
The relatively small polymer particles allow a higher solids level to be achieved within the reactor.
The percent recovery would be dependent on source water temperature and total dissolved solids level.
The dispersion can then be adjusted to a suitable solids level for coating prior to use.
The solids level is a combination of the copolymer binder, other polymeric binders, and adjuvants.
They demonstrate surprisingly good speed of set and creep resistance at such high solids level.
See also
In bioremediation operations, the solids level tends to be very high.
Pigments and fillers may be added up to about a 50 percent solids level.
After the polymerization was completed the solids level was about 50 percent by weight.
Cooking occurs thereto in a batch cooker with 3 % dry solids level.
This requires a very low solids level below about 8 % in order to atomize the material.
Generally, more of the stabilizer is needed as the solids level increases.
At this time the solids level was about 47 percent.
Pound per cubic foot density foam at 20 % graft polymer solids level.
However, as the " organic " solids level increases the compressibility increases.
The resin was then dissolved in a saturated aliphatic solvent at a 50 % solids level for hydrogenation.
All solutions had an overall solids level calculated to be 7.9 percent by weight.
The transformation takes place on a web having a sheet solids level greater that 15 %.
Lower solids level products may require from 1 to 8 % by weight of the stabilizer.
Fiber coverage is provided by increasing the application solids level of the carbonate-containing coating.
The solids level is 41 % and particle diameter is estimated to be 42 nanometers.
Water was then added to provide a solids level of 38 percent.
The total solids level of the final solution was 8.25 weight percent.
The biomass harvested from the process has a solids level of about 5 % by weight.
The final solids level was 55.0 % and the particles were seen to be mostly triplets.
Dispersant A is a conventional wax treatment that has a solids level of approximately 20 %.
Control panel for vibrator, solids level sensors, frequency converter, automated valve.
Starch and PVOH were cooked separately and diluted to a solids level of about 15 %.
For example, a Dynatrol bulk solids level detection device 17 may be provided.
Sample B gelled quickly when stirred in water at a solids level of 1 %.
Each suspension had a total solids level of 7.5 percent by weight.
The intermediate pressure chamber 28 is equipped with a polymer solids level sensor 38.
The resulting dispersion had a solids level of 36 % and a particle size of 75 nm.
The resulting coating solution had a total solids level of 12 %.
The slurry reached a solids level of 73.7 wt % before the evaporator recirculation pump failed again.
Sample A was mixed with water for a total solids level of 1 %, and gelled quickly.
A " 2 dyne " clay slurry is less viscous than a " 9 dyne clay " slurry at a given solids level.
The resulting solution had a total solids level of 10 % by weight.
The theoretical dye-grafted oligomer solids level in the reaction mixture was 29.1 weight percent . ARC Formulation.
Thus the position of the entry 82 defines the solids level in hopper 31.
The theoretical dye-attached oligomer solids level in the solution was 29.2 weight percent . ARC Formulation.
You'll also be interested in:
Examples of using Level
Show more
The deepest level is usually the first
Automakers took the fight to a new level
Check oil level and fill if needed
Examples of using Solids
Show more
The solids feared our metamorphic abilities
A sieve separates solids from used liquids
Solids liable to become liquid during transport
