Examples of 'solution hose' in a sentence
Meaning of "solution hose"
solution hose: a hose used for spraying cleaning solutions in carpet cleaning machines
How to use "solution hose" in a sentence
Basic
Advanced
solution hose
Solution hose connection not fully engaged.
Disconnect the solution hose quick coupling.
Connect bleeder hose onto solution hose.
Attach accessory solution hose to quick coupler.
Solution hose not completely connected to hose or to machine.
Brush drive and solution hose group.
Cleaning tools connect to the vacuum and solution hose.
Make sure solution hose is connected.
Connect the accessory tool hoses to solution hose.
Inspect the solution hose daily for any damage.
Check and clean the fi lter screen in the solution hose.
The solution hose connector is located in the center in the rear of the machine.
Check and clean the filter screen in the solution hose.
Submerge the solution hose screen into the solution tank and close the cover.
Replace the filter by pushing it over the end of the solution hose.
See also
Install the filter and the solution hose in the tank, then install the plug.
After cleaning, relieve the water pressure from the accessory tool before disconnecting the solution hose.
Connect accessory solution hose to quick coupler located in front of handle Figure 6.
Connect the accessory tool 's solution hose to the.
Then connect the solution hose to quick coupler located below handle Figure 2.
Attach the spray gun ( E ) to the other end of the solution hose 5.
Connect solution hose to quick disconnect coupler located behind right drive wheel Figure 28.
Snap clip back into position making sure solution hose ( N ) is not pinched and moves freely.
Submerge the solution hose screen into the solution tank and close the cover Figure 7.
Disconnect the priming hose and attach the solution hose ( 7 ) to the quick disconnect D.
Connect accessory solution hose to the quick coupler located in front of the handle Figure 5.
Mount the quick-coupling Pos.3 and 4 to the newly formed solution hose ends.
Install the fi lter and the solution hose in the tank, then install the plug.4.
Solution hose to brush / cylindrical brushes 20.
Install the fi lter with the solution hose inside the tank, than install the plug.4.
Slide up the brass “ quick coupler ” ring and pull out the small solution hose ILLUS.1.
Disconnect solution hose from scrub head Figure 49.
Then, rinse the tank and clean the solution hose filter ( 25 ) with clean water.
Keep the solution hose connected and turn the Filter Assembly ( E ) 1/4 turn counterclockwise to loosen.
Connect the accessory solution hose to the Accessory Port 27.
Attach the accessory 's solution hose ( waterline ) to the machine 's Accessory Solution Port F.
Attach the accessory 's solution hose to the machine 's Accessory Solution Port 2.
Cut the solution hose as shown at approx . 66 mm.
Clean the solution hose screen Figure 28.
You'll also be interested in:
Examples of using Hose
Show more
Store chemical hose so it is protected from damage
Hose nozzle air suction regulator is open
Disconnect hose from used water tank
Examples of using Solution
Show more
One proposed solution is sustained livelihood programmes
Find a ripe moment to propose solution or option
There is now a solution to most of these problems
