Examples of 'solution was slowly added' in a sentence
Meaning of "solution was slowly added"
solution was slowly added: This phrase indicates that a solution or resolution was implemented gradually or over time. It suggests a progressive or incremental approach to addressing a problem or issue
How to use "solution was slowly added" in a sentence
Basic
Advanced
solution was slowly added
This solution was slowly added to the reaction mixture.
Afterwards a saturated aqueous sodium bicarbonate solution was slowly added until the solution was alkanized.
Said solution was slowly added to crospovidone in a granulating drum at room temperature.
Then the remainder of the monomer solution was slowly added over a 3 hour period.
This solution was slowly added dropwise to the support material while stirring.
Then, the above methyl isobutyl ketone solution was slowly added dropwise over 2 hours.
This solution was slowly added to the distillation pot throughout the distillation.
One mole of 1N HCl solution was slowly added.
The solution was slowly added to the stirred bulk phase dropwise using an addition funnel.
The previously prepared 2-iodobenzoyl chloride THF solution was slowly added to the reaction mixture.
The second solution was slowly added dropwise to the mixture.
After reaction was complete, a saturated NH4Cl solution was slowly added under a N2 atmosphere.
Next, norketotifen solution was slowly added and the composition mixed until the solvent was dispersed.
During the stirring, 100ml of glycosaminoglycan solution was slowly added.
The hydrogen peroxide solution was slowly added to the MeOH solution.
See also
Under ice-cooling 20 ml of 4M hydrochloric acid-ethyl acetate solution was slowly added dropwise.
The cold anion solution was slowly added dropwise to the cold amide solution.
The reaction was cooled to 0°C and 30 mL saturated NaHCO3 solution was slowly added while stirring.
The titanyl acetylacetonate solution was slowly added to the silica under vacuum at room temperature.
The reaction solution was cooled to 0°C and 200 ml saturated ammonium chloride solution was slowly added.
The terephthaloyl chloride solution was slowly added to the polymer solution with rapid stirring.
This solution was slowly added dropwise vía an addition funnel to the 2L flask over 10 min.
At room temperature, the lithium thiopropylate solution was slowly added over a period of 30 minutes.
NaOH solution was slowly added to adjust the pH to 7.
After concentration to about 50 mL the solution was slowly added to 500 mL of water.
The glycine solution was slowly added to the solution of Procion Red 8B.
The previously obtained tetrahydrofuran solution was slowly added and the temperature was kept below 10 °C.
This solution was slowly added to component 3 with mixing on a high speed powder mixer ( Papenmeiyer ).
A sodium hydroxide solution was slowly added until the pH reached 5.
The solution was slowly added with constant stirring to a 1.4 wt. % slurry of Na-montmorillonite.
After cooling to rt, 1 N HCl solution was slowly added to the mixture until pH 4.0.
To this solution was slowly added 20 ml of diethyl ether.
A 3 % sodium hydroxide solution was slowly added to the vortex of the starch slurry.
To this solution was slowly added 1.0 mL of water to decompose any unreacted sodium hydride.
The butyllithium solution was slowly added to the cold THF solution over 1 h.
The clear solution was slowly added to ice cold water ( 10 mL ) giving an oily suspension.
The MAO / metallocene solution was slowly added to the suspension of the support material.
The salt solution was slowly added to the zeolite suspension at a temperature of about 25°C.
The butyllithium solution was slowly added to the cold THF solution over 1 hour.
The Na ₂ CO ₃ solution was slowly added to the Na-montmorillonite suspension while stirring.
Into the stirred aqueous solution was slowly added 40 grams of ethylene glycol ( 1 mole equivalent ).
To this solution was slowly added 10 mL of hexanes.
The reaction solution was slowly added to a solution of saturated aqueous Na2CO3 and stirred for 1h.
SPDP stock solution was slowly added at a 5-fold molar excess to the tube, mixing constantly.
The CH2Cl2 solution was slowly added dropwise to 500 ml of stirred ethyl ether.
Aqueous 10 % HCl solution was slowly added and the mixture was extracted with Et2O.
To the residual solution was slowly added 1.0M aqueous hydrochloric acid until pH < 2.
To this stirred solution was slowly added bromine, keeping the temperature below 34 °C.
The resulting solution was slowly added to the reactor over a one-hour period at a temperature of 125°C.
You'll also be interested in:
Examples of using Solution
Show more
One proposed solution is sustained livelihood programmes
Find a ripe moment to propose solution or option
There is now a solution to most of these problems
Examples of using Added
Show more
I added some extra layers for fullness
New reports will be added as they are published
He added a number of other minor editorial changes
