Examples of 'spacer grids' in a sentence
Meaning of "spacer grids"
spacer grids - a term that could refer to a system or pattern of empty spaces within a structure or design to create a balanced layout
How to use "spacer grids" in a sentence
Basic
Advanced
spacer grids
Spacer grids are secured to the frame structure.
The rods are held transversely and longitudinally by the spacer grids.
Spacer grids may be manufactured in many different ways.
This eliminates the risk of the spacer grids of the fuel assemblies catching.
Spacer grids also contribute significantly to the resistance to coolant flow.
Nuclear fuel assembly with spacer grids and eccentric support of fuel rods.
During assembly, the guide tubes are inserted into the spacer grids.
The belt of the spacer grids also includes mixing vanes secured to its upper edge.
This avoids any risk of catching between the spacer grids of the fuel assemblies.
Spacer grids secured to the guide tubes and serving to hold the rods ;.
However, the use of additional spacer grids results in increases in pressure drop.
Assuming present reactor designs, up to nine low pressure drop spacer grids could be used.
The fuel bundles include spacer grids to maintain alignment and spacing of the fuel bundles.
The fuel rods 6 extend through the cells and are supported by the spacer grids 16.
Also in this case, spacer grids offer a considerably high resistance to coolant flow.
See also
According to an embodiment, the fuel assembly 4 comprises ten spacer grids 26.
Spacer grids ( not shown ) keep the membrane sheet from collapsing under the applied pressure.
The process for assembling the tubes 28 in the spacer grids 27 will be described hereinbelow.
The spacer grids 6 are conventionally secured to the water channel 12.
The nuclear fuel assembly 2 comprises spacer grids 6 distributed along the length of the fuel rods 4.
The spacer grids 22 have an opening in their central zone for housing seed region 2 therein.
The fuel elements 8 of blanket region 3 are positioned in the spacer grids 22.
Only five of the spacer grids 18 are shown in Figure 1 for clarity of illustration.
Each mixing grid 15 is positionned in the span between two successive spacer grids 14.
The PWR and BWR spacer grids 14 are distributed in spaced relationship along the fuel rods 4.
The openings 45 enable the cooling fluid to flow transversely above the spacer grids 13.
Spacer grids 13 for holding the rods 3 at the nodes of the array.
The distance between two successive spacer grids is about 150 millimeters ( mm ).
Only two spacer grids 14 are visible on Figure 2.
You'll also be interested in:
Examples of using Spacer
Show more
Height of spacer device for positioning of dummy
This could crush the spacer inside
Pivotal spacer to match varying degrees of pitch
Examples of using Grids
Show more
Remove cooking grids and heat plates
Grids are commonly described as spatial units that
All the two grids are back online
