Examples of 'spark arrestor screen' in a sentence

Meaning of "spark arrestor screen"

spark arrestor screen: This phrase refers to a device or component used in machinery or equipment to prevent sparks or flames from escaping and causing fires or hazards

How to use "spark arrestor screen" in a sentence

Basic
Advanced
spark arrestor screen
Replace the spark arrestor screen if it is defective.
The engine exhaustmuffler has a spark arrestor screen.
Clean spark arrestor screen carb models.
Remove the clamp and spark arrestor screen.
Spark arrestor screen must be checked periodically.
Installation of the spark arrestor screen is the reverse of the.
Never operate the generator without a spark arrestor screen.
To remove the spark arrestor screen proceed as follows.
Some mufflers are equipped with a special spark arrestor screen.
Clean the spark arrestor screen with a wire brush.
We therefore fit certain mufflers with a spark arrestor screen.
A faulty spark arrestor screen can create a fire hazard.
The muffler is equipped with a special spark arrestor screen.
Replace the spark arrestor screen if it is cracked or otherwise deteriorated.
Loosen the clamp and remove the spark arrestor screen from.

See also

Remove the spark arrestor screen from the muffler.
Use a brush to remove carbon deposits from the spark arrestor screen as needed.
The spark arrestor screen should be cleaned once a month.
The muffler is equipped with a spark arrestor screen is in the muffler.
The spark arrestor screen should be checked and cleaned regularly.
The muffler is equipped with a spark arrestor screen inside muffler body.
A spark arrestor screen is used to control sparks and embers when provided with the unit.
The muffl er is equipped with a spark arrestor screen inside muffl er body.
The spark arrestor screen is retained by the deflector C.
Slide the spark arrestor band clamp off the spark arrestor screen.
Clean the spark arrestor screen with a wire brush or replace it.
Consequently, we have equipped the muffler with a spark arrestor screen mounted inside the muffler.
Remove the spark arrestor screen from the muffler by loosening.
Loosen the clamp and remove the spark arrestor screen from the muffler.
If the spark arrestor screen is damaged, replace it immediately.
Replacing / cleaning the spark arrestor screen STOP.
Remove the spark arrestor screen from the spark arrestor diverter.
Make sure that the spark arrestor screen fits flat against the muffler.
Clean spark arrestor screen page 24.
I'll even put a spark arrestor screen in it for you.
Slide the spark arrestor screen out from the tail pipe.
Pull out the spark arrestor screen and clean using a wire brush.
Reinstall the spark arrestor screen snugly back into the spark arrestor hood.

You'll also be interested in:

Examples of using Spark
Always set the spark deflector correctly
Spark arresting screen in muffler and spacer
Cleaning of spark plug and adjusting gap
Show more
Examples of using Arrestor
Replace the spark arrestor screen if it is defective
Never operate unit without a spark arrestor
Clean spark arrestor screen carb models
Show more
Examples of using Screen
Screen indicates whether the unit is recording
In the following screen select the tab
The screen shows three turns at a time
Show more

Search by letter in the English dictionary