Examples of 'spark plug lead' in a sentence
Meaning of "spark plug lead"
spark plug lead: Refers to an insulated wire that connects the distributor or ignition coil to the spark plug in an internal combustion engine. This phrase is commonly used in automotive contexts
How to use "spark plug lead" in a sentence
Basic
Advanced
spark plug lead
Con nect the spark plug lead.
Spark plug lead not connected.
Remove the spark plug lead.
Pull spark plug lead prior to working on the leaf sweeper.
Connect the spark plug lead.
Spark plug lead not correctly fi tted Check and fi t tightly.
Disconnect the spark plug lead and allow the.
Replace spark plug but do not connect spark plug lead.
Remove spark plug lead before maintenance.
It was a loose spark plug lead.
Remove spark plug lead and spark plug cap.
Remove the air cleaner cover and the spark plug lead.
Remove the spark plug lead before adjusting.
Always stop the engine and disconnect the spark plug lead.
Remove the spark plug lead and spark plug.
See also
Overheating, immediately disconnect the spark plug lead.
Reconnect the spark plug lead to the spark plug.
If vibration persists, immediately disconnect the spark plug lead.
Avoid touching the spark plug lead during operation.
Spark plug lead may be hot - handle with care.
Disconnect starter key and spark plug lead before proceeding.
If the engine will still not start, immediately disconnect the spark plug lead.
Remove the spark plug lead from the spark plug.
Run the engine warm, remove the spark plug lead.
Carefully pull the spark plug lead from the spark plug.
Wait until the engine has stopped, then pull spark plug lead.
Remove ignition key and spark plug lead when working on the blade.
Install and tighten the spark plug, and reconnect the spark plug lead.
Disconnect the spark plug lead and allow the engine to cool down.
If the engine still lacks power and / or is overheating, immediately disconnect the spark plug lead.
Disconnect the spark plug lead and cover the end with insulating tape.
If the engine will still not turn over, immediately disconnect the spark plug lead.
Stop engine by removing spark plug lead and refer to the engine maintenance manual.
Before cleaning or repairing the mower, stop the engine and disconnect the spark plug lead.
Unclip the spark plug lead and remove the spark plug with a spark plug.
Turn off the engine, wait until the engine has stopped, then pull spark plug lead.
The engine must be stopped and the spark plug lead disconnected in the following circumstances.
Stop the engine, wait until the blade has stopped and disconnect the spark plug lead.
Disconnect the spark plug lead and keep it away from the spark plug during maintenance.
There you go . It was a loose spark plug lead.
Always remove the spark plug lead before repairs, cleaning or maintenance work.
Clean the casing Important, before cleaning extract the spark plug lead.
Always remove the spark plug lead before repair, cleaning or maintenance work.
Sharp tines - Beware of cutting fi ngers or toes - Remove spark plug lead before maintenance.
Always remove the spark plug lead be fore repairs, cleaning or maintenance work.
Do not re-connect the spark plug lead.
Remove the spark plug lead Loosen the wire / cable from the handle before carefully folding it.
Before leaving the mower remove the spark plug lead and - if fitted - the starting key.
Set the spark plug lead wire and the motor lead wire . Fig . 68.
Reconnect the motor lead wire and then the spark plug lead wire Fig . 41.
You'll also be interested in:
Examples of using Plug
Show more
Plug the machine into a suitable outlet
Put the small plug in the appliance
Plug the charger into proper outlet
Examples of using Spark
Show more
Always set the spark deflector correctly
Spark arresting screen in muffler and spacer
Cleaning of spark plug and adjusting gap
Examples of using Lead
Show more
This would lead to better utilization of resources
But you gotta take the lead
Delay in treatment can lead to amputation or death
