Examples of 'speaker outputs' in a sentence
Meaning of "speaker outputs"
This phrase refers to the sound or audio signals produced by a speaker or audio system. It represents the audio content that is being transmitted or emitted by a speaker or similar device
How to use "speaker outputs" in a sentence
Basic
Advanced
speaker outputs
Supports balanced speaker outputs and switching.
Disconnecting speaker wire to the speaker outputs.
Only one speaker outputs sound.
Left and right amplifier speaker outputs.
The speaker outputs a distorted sound.
From source unit highlevel speaker outputs.
Only the center speaker outputs substantial sound.
The limiter affects only the speaker outputs.
Only one side speaker outputs the sound.
Relations between sound fields and speaker outputs.
There are five speaker outputs available.
Controls the crossover point for the speaker outputs.
Any one of the speaker outputs can be tapped for this.
They point to the lack of signal at the speaker outputs.
There are two parallel speaker outputs for connecting external speaker cabinets.
See also
Each channel provides a separate signal at the speaker outputs.
The list below shows which speaker outputs sound when a certain sound field is selected.
Connect the other speakers to the remaining speaker outputs.
Center or Subwoofer speaker outputs do not function.
Only suitable passive speakers can be connected to the speaker outputs.
Connect the left and right front speaker outputs of your receiver to the.
Your car radio is only equipped with amplified outputs speaker outputs.
Speaker Outputs the sound of the connected device.
About the wireless speaker outputs.
Speaker outputs via lockable Speaker jacks and pairs of screw terminals.
Dual binding post speaker outputs.
Please note that when making these connections the signal inputs correspond with the speaker outputs.
These are powered speaker outputs.
Outputs Speaker outputs sure seal connectors.
Never parallel the speaker outputs.
Connecting the Speaker Outputs Connection when using a subwoofer.
You can connect a additional subwoofer with the free speaker outputs.
Stops sound to the speaker outputs of certain Arcam amplifi ers.
Only the included or other suitable passive speakers may be connected to the speaker outputs.
The amplifier has two pair of speaker outputs on the back.
Speaker outputs 4 mm jacks with screw terminals.
Use speaker cables to connect these inputs to the speaker outputs of a power amplifier.
Speaker outputs as screw terminals, alternatively to the speaker jacks.
Turn off the amplifier and disconnect the speaker outputs from the amplifier.
The speaker outputs are controlled by the switch 5 on the front panel.
Connect the left and right speakers to the speaker outputs on the rear panel.
The different speaker outputs allow to connect various speaker combinations see fig . 3.
This test will check the the components which are connected to the speaker outputs.
DO NOT connect it directly to speaker outputs as it will permanently damage the speaker.
Short-circuit on any of the speaker outputs.
You should NEVER connect the speaker outputs of a guitar amplifi er to anything except speakers.
This signal mirrors the Speaker Outputs.
Five-way binding post speaker outputs can be found on each channel regardless of model.
Protect Mode will disconnect the speaker outputs via relais.
Built-in speaker Outputs sound from audio equipment connected to this product.
You'll also be interested in:
Examples of using Speaker
Show more
Pair your speaker with your device
Wall mounting the rear speaker system
Check your speaker wires and connections
Examples of using Outputs
Show more
Two outputs will contribute to this outcome
Development of statistical outputs from business registers
Three outputs will contribute to this outcome
