Examples of 'speakers connected' in a sentence
Meaning of "speakers connected"
speakers connected - This phrase refers to the state of having audio speakers properly linked or attached to a device or system. It means that the speakers are physically connected or wirelessly paired, allowing them to produce sound or play audio from the device
How to use "speakers connected" in a sentence
Basic
Advanced
speakers connected
The speakers connected to the microphone buzz.
Sound is output from the speakers connected to the receiver.
Items to be displayed vary depending on the number of speakers connected.
This switches the speakers connected to speaker terminals.
Extensive protective circuits protect the amplifier as well as the speakers connected.
Sound output from the speakers connected to this unit is muted.
Extensive protective circuits protect the amplifier and the speakers connected.
Additional speakers connected to a single amplifier channel will drop nominal impedance.
The audio is not output from the speakers connected to the wireless unit.
This will prevent distortions at high volume and protect the speakers connected.
Displays the number of speakers connected to this unit in the following order.
The centre channel will not be heard without external front speakers connected.
The amplifiers and the speakers connected are protected through extensive protective circuits.
Do not attach the display to the stand with the speakers connected to the display.
In all areas there are speakers connected with the main sound system of the villa.
See also
Some control operations will be confirmed by status information announced via the speakers connected.
Speakers connected to the Direct outputs are always heard.
Perform the appropriate settings for the application aim of the speakers connected to this product.
All AirPlay compatible speakers connected to the Apple gadgets a little differently.
EAX becomes more effective as the number of speakers connected is increased.
Speakers connected to the audio TV system.
Do not chassis ground any speakers connected to this or any other JI Audio amplifier.
This Illustration shows the total impedance loads of various combinations of speakers connected in parallel.
You can also use two Sony wireless speakers connected to the receiver as surround speakers.
Controls MASTER LEVEL for the volume of the speakers connected.
Select ZoneB if the speakers connected to the SPEAKERS B terminals are set in another room.
Sound is output from the TV speakers and the speakers connected to the receiver.
The set of speakers connected to the A or B terminals is on.
Only select the SPEAKER outputs with speakers connected.
The speakers connected to the SPEAKER A terminals will be heard.
Adjust the HIGH CUT control according to the main speakers connected.
Enjoying the TV sound from the speakers connected to the receiver System Audio Control.
Change the unit 's speaker impedance settings depending on the impedance of the speakers connected.
Are audio source and speakers connected correctly?
The Full Band Phase Control feature calibrates the frequency-phase characteristics of the speakers connected.
Are the main speakers connected correctly?
ON, You can listen to your telephone calls from the speakers connected to this unit.
Is one of the speakers connected with the polarity reversed?
Amp Outputs HDMI sound signals form the speakers connected to this unit.
Headphones or speakers connected to your computer - to listen to video tutorials.
Amplifier Outputs HDMI sound signals form the speakers connected to this unit.
A - Sound is output from the speakers connected to the A speaker terminals multichannel playback is possible.
You can play decoded AC-3 soundtracks through the speakers connected to the receiver.
However, those same 2-ohm speakers connected in parallel would have a total impedance of only 4 ohms.
The second ( ) shows orientation with two surround back speakers connected.
In this case, the speakers connected will remain mute.
For additional sound processing of the signals from the speakers connected to the PMX-700DSP.
Are the inputs and speakers connected correctly? Has a plug come loose?
A 2.1 speaker system consists of left and right stereo speakers connected to a powered subwoofer for bass.
If you have USB speakers connected to your computer, select those instead of " Built-in Output.
You'll also be interested in:
Examples of using Connected
Show more
You are directly connected to three different murders
Connected switch is offline or not operating properly
The audio cable is connected to the headset
Examples of using Speakers
Show more
Some speakers also highlighted emerging challenges
Identify potential speakers for the workshop
Speakers are not placed in the proper position
