Examples of 'specified limits' in a sentence
Meaning of "specified limits"
Specified limits refers to the boundaries or constraints that are set or established for a particular purpose. These limits define the range or extent within which something is allowed or can operate. They are used in various contexts, such as legal regulations, technical specifications, or instructions, to ensure compliance and control
How to use "specified limits" in a sentence
Basic
Advanced
specified limits
These should be within the specified limits.
And specified limits according to national and international standards.
Rail wear was determined to be within specified limits.
There are usually specified limits set by the employer.
That are intended to keep errors within specified limits.
Home insurance usually has specified limits on these types of items.
And concentration of airborne particles is controlled to specified limits.
This value may vary within the specified limits in process of recording.
Transferability of the method achieved within specified limits.
Testing outside the specified limits for temperature and humidity may not yield valid results.
Rebalancing periodically or when specified limits are exceeded.
Electronic components must be cooled to maintain their operating temperatures below the specified limits.
Load the devices to the specified limits only.
Appropriate measurements must be taken prior to commissioning to assess compliance with the specified limits.
Secs reach their specified limits.
See also
Parameters are allowed to be uncertain following uniform distributions between specified limits.
Transfers of value made within specified limits are known as "exempt transfers.
It is still possible to claim capital losses within specified limits.
The specified limits may be extended by agreement with the Attorney-General.
Loads exceeding the specified limits.
One of the specified limits is its " cost amount ".
Regulate the temperature within the specified limits.
Always keep tow loads within specified limits in the Trailer Towing-Load Table.
Variations in the time intervals are constrained within specified limits.
Self-directed learning within the specified limits acceptable to the profession.
The part of the calculated uncertainty exceeding the specified limits.
Among the parameters controlled within specified limits are pH, dissolved oxygen tension ( DOT ), and temperature.
Such systems require frequent recalibration to remain inside specified limits.
Conditions outside specified limits of repairability - see paragraph 5.3.
Use the tool only within its specified limits.
All integrity tests performed after filtration experiments described herein complied with specified limits.
By the drive exceeds specified limits.
We guarantee reliability if you use the product within its specified limits.
All keeeper products are temperature-resistant within the specified limits of the respective product.
The purity of each batch should be established and be within specified limits.
Verification that the contact resistance is below pre specified limits is required.
Safe operation requires that the voltage remain within specified limits.
All known and unknown impurities were within the specified limits mentioned in USP.
Process capability is the ability of a process to produce output within specified limits.
Flow and density must be within the specified limits Do NOT.
A supervisor will usually have the authority to make purchases within specified limits.
Only in two charges was the carbon content slightly higher than specified limits see Appendix 3.
The plant operator shall be responsible for proposing these specified limits.
The water flow through the machine is outside the specified limits.
The air flow to and from the machine is outside the specified limits.
The volume of water within the body has to be kept within specified limits.
The temperature and relative humidity must also be kept within specified limits.
You should arrange them so that they do not exceed the specified limits.
The gauge reading is taken to ensure the system is functioning correctly within specified limits.
The one indicated here assumes that the true parameter value lies inside the specified limits.
You'll also be interested in:
Examples of using Specified
Show more
Each address must be specified in a separate line
The specified file will be passed to tester
Time ranges are often specified in the tables
Examples of using Limits
Show more
Bidding limits for treasury bill auctions
Market risk measurement and limits in trading
Time limits for these are frequently extended
