Examples of 'spin-coating' in a sentence
Meaning of "spin-coating"
Spin-coating is a technique used in the semiconductor industry to apply thin and uniform films to substrates by spinning the substrate at high speeds while dropping liquid onto it
How to use "spin-coating" in a sentence
Basic
Advanced
spin-coating
The film was produced by spin-coating on a glass lamella.
Yttrium oxide thin films were obtained by spin-coating.
The preferred technique is the spin-coating technique or the spray-coating technique.
The application is preferably carried out by spin-coating.
Then, a thin film was obtained by spin-coating this chloroform solution on a glass substrate.
The film is most appropriately made by spin-coating.
This spin-coating technique is desirable because it results in a smooth and uniform coating.
Amorphous molecular films are produced by evaporation or spin-coating.
The dye sometimes precipitates during spin-coating under predetermined process conditions.
The polystyrene is preferably deposited on a silicon substrate by spin-coating.
From among conventional coating techniques, spin-coating and spraying are the preferred methods.
The solution is customarily spread over a substrate by spin-coating.
Selective retention of semiconducting SWNTs during spin-coating and reduced sensitivity to adsorbates were demonstrated.
Such resins are highly appropriated to make films by spin-coating.
The conventional spin-coating technique is not appropriate since it would leave the slopes uncovered.
See also
Polymeric layers can be formed by spin-coating and curing.
For example, spin-coating is a suitable technique.
The additional insulating material is for example deposited by spin-coating.
The various rotational speeds of the spin-coating device modify the structure of the mask.
At least one of the coating steps may include spin-coating.
Spin-coating may not be the final manufacturing solution, however.
The polymers and copolymers are deposited on the substrate by spin-coating a solution.
Spin-coating apparatuses have, therefore, specification suitable to the materials of these films.
Impregnation can take place either during or after the spin-coating.
The semiconductor film was obtained by spin-coating of the p3ht in chloroform.
The spacer layer can be formed of a photopolymer material deposited by spin-coating.
Next, a UV-crosslinkable polymer is deposited by spin-coating onto the entire surface of the substrate.
The insulating layer can also be deposited by evaporation or by a technique known as spin-coating.
To produce a smooth thin film, the spin-coating method is used.
The above-described thermally curable systems are formed into thin layers by spin-coating.
This deposition may be performed via a spraying, spin-coating or dip-coating technique.
The perovskite precursor solution is coated within the porous alumina film via spin-coating.
The thin sol-gel layer is obtained by spin-coating under the following conditions,.
The different layers of polymers may be deposited by the so-called spin-coating method.
The sol-gel may be formed vía spin-coating the precursor solutions onto the etched cavities 30.
Thin films can be produced on a piece of substrate by spin-coating or dip-coating.
Spin-coating was performed on a Headway Research Inc. photoresist spin coater.
The deposited solution may be spun to create a spin-coating of the solution.
For example, standard spin-coating produces films with thicknesses between 1 and 10 micrometers.
This material may be processed from a precursor solution vía spin-coating in ambient conditions.
The spin-coating was caried out at approx 1000rpm at slow speed for five seconds.
The most common prior art method of making such layers is spin-coating.
Fig . 6 is a sectional view illustrating a spin-coating apparatus conventionally used . Description of the Symbols.
Additional layers of polymers were deposited on the polymer-grafted plates by using a spin-coating process.
Typically, if photoresist 5 is deposited by a spin-coating technique, photoresist 5 fills the whole volume of cavity 1.
The thickness of the obtained photochromic coating could be adjusted depending upon the spin-coating conditions.
Second elastomeric layer 22 may be created by spin-coating an RTV mixture on microfabricated mold 11.
The final thickness of PZT is obtained by adjusting the number of depositions by spin-coating.
The solution is deposited on a quartz Suprasil by spin-coating obtianing a thin film.
Resin 18 is for example parylene deposited in vapor phase or by spin-coating.
