Examples of 'spindle' in a sentence
Meaning of "spindle"
spindle (noun) - a rod or pin serving as an axis that rotates or oscillates, or a rod on which fibers are formed into yarn
Show more definitions
- A rod used for spinning and then winding natural fibres (especially wool), usually consisting of a shaft and a circular whorl positioned at either the upper or lower end of the shaft when suspended vertically from the forming thread.
- A rod which turns, or on which something turns.
- A rotary axis of a machine tool or power tool.
- Certain of the species of the genus Euonymus, originally used for making the spindles used for spinning wool.
How to use "spindle" in a sentence
Basic
Advanced
spindle
For main spindle drives on machine tools.
The valves have an external spindle thread.
Spindle probing software functionality comparison chart.
Check that the spindle is not locked.
Spindle together with the clamping collet.
Single speed spindle with single stop.
Spindle adapter flanges for machine tools.
Turn the regulation spindle in an anticlockwise direction.
The valves have an internal spindle thread.
Rotate spindle by observing the spindle graduation.
Fasten the drill spindle to the collar.
More spindle power for turning operations.
Depress and hold spindle lock button.
Perfect synchronization with the main spindle.
Insert spindle into new paper roll.
See also
Cutter should be fully seated into spindle.
The different spindle modes could be as follows.
Thread of accessory must match thread of spindle.
Tighten spindle with wrench to secure to frame.
Make sure the grinder spindle is at standstill.
Make sure it completely sits on the spindle.
Hold the spindle lock button down.
Direct drive via the spindle motors.
The deck spindle has a normal thread.
This tool is equipped with a spindle lock.
Drilling spindle rotates when engine is idling.
Protective guide for work on spindle moulder.
Hold down the spindle lock whilst doing so.
Place the external flange on the spindle.
Slide chuck into spindle of drill press.
Apply axial pressure to the drive spindle.
Hold handle and spindle housing fi rmly.
Attach wire cup brush onto spindle.
Coolant through the spindle high pressure.
Place the backing flange on the spindle.
Switched off and the spindle at a standstill.
Put the inner flange on the spindle.
Maximum spindle speed for thread cutting.
Thread the wheel on the spindle by hand.
Spindle and nut have right hand threads.
Three turns of the spindle of thread remained.
Place your record on the center spindle.
Recovery of workpieces at counter spindle replaces standard manipulator.
Never force an accessory onto the spindle.
The bobbin winder spindle is in the winding position.
Do not use a hammer when operating spindle.
Adjustment via threaded spindle when in place.
Adjustment when installed by means of a threaded spindle.
Place the spool on the spindle in such a.
Inside are a set of vanes which are mounted on a spindle.
