Examples of 'spinning speed' in a sentence
Meaning of "spinning speed"
spinning speed: This phrase refers to the rate at which an object or element rotates or spins around an axis. It is commonly used in contexts such as describing the rotations per minute (RPM) of a motor or the speed of a spinning top
How to use "spinning speed" in a sentence
Basic
Advanced
spinning speed
Turntable spinning speed control knob.
This effect was more evident at low spinning speed.
No upper limit to the spinning speed has been determined.
The effect of draw ratio is compared at each spinning speed.
Drum movement is reduced and spinning speed is limited to prevent creasing.
We looked and saw this guy running in our direction and spinning speed.
The fast spinning speed minimized the intensities of the spinning side bands.
These phenomena become more pronounced as the spinning speed is increased.
Productivity and spinning speed of the fiber spinning process is thus considerably reduced.
The balancing operations are repeated until the final spinning speed is reached.
The spinning speed employed throughout the text is also the speed of winding the yarns.
This sequence is repeated until the desired final spinning speed is reached.
The controller may increase a spinning speed when adjusting the final spinning mode algorithm.
The spinning side bands are labeled and were confirmed by varying the spinning speed.
Bulk is found to increase with spinning speed as previous taught by Frankfort and Knox.
See also
The adjusting of the final spinning mode algorithm may include increasing a spinning speed.
V is the spinning speed given in kilometers / minute.
Heated godet temperatures were the same for the two examples compared at each spinning speed.
At a certain instant, the spinning speed was finally reduced.
This preferably gives the filaments a velocity of more than one tenth of the spinning speed.
However, lowering spinning speed reduces manufacturing productivity.
This is reflected in the increasing IT parameter with increasing spinning speed.
Furthermore, the spinning speed can be chosen on the basis of the sensed unbalance.
Therefore, the denier decreased as spinning speed increased.
The spinning speed of the sample was 4 Khz.
Using afterwards a domestic dryer max . spinning speed is recommended.
The complete rotator arch has a total of 8 motorised highpressure rotators to ensure a constant spinning speed.
By pressing this button, the required spinning speed can be selected.
More preferably, the spinning speed comprises at least about 60 meters per minute.
However, yarn quality deteriorates with increasing spinning speed.
The yarn properties for each spinning speed trial are given in Table 5.
Samples were measured at room temperature in a 7 mm ZrO2 rotor using a spinning speed of 4 KHz.
The yarn tenacity for each spinning speed trial is given in Table 4.
That is, poly ( trimethylene terephthalate ) orientation is normally increased when spinning speed is increased.
In a preferred embodiment, the spinning speed comprises at least about 90 meters per minute.
Withdrawing the solidified multifilament yarn from the quenching zone at a desired spinning speed V ( km / min ) ;.
The yarn spinning speed was determined by the surface speed of roll assembly 275.
The hollow fibre membrane was formed at a spinning speed of 13 m / min.
More preferably, the spinning speed comprises no greater than about 450 meters per minute.
The hollow fiber membrane was formed at a spinning speed of 25 m / min.
The draw ratio, spinning speed and properties are set forth in Table 3.
The tenacity and elongation-to-break for each spinning speed trial are given in Table 1.
A spinning speed of 3500 rpm for 20 seconds was used for the deposition of modification layer.
In another preferred embodiment . the spinning speed comprises no greater than 225 meters per minute.
The spinning speed SS was approximately 11 m / min.
The tenacity and elongation-to-break for each spinning speed trial are presented in Table 2.
Even more preferably, the maximum spinning speed comprises no greater than about 165 meters per minute.
A process for spinning of multi-component polymer filaments at a spinning speed of at least 30 metres / minute . comprising,.
Apparatus for spinning of multi-component polymer filaments at a spinning speed of at least 30 metres / minute, comprising,.
You'll also be interested in:
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
Examples of using Spinning
Show more
And so we were spinning with it and moving around
Spinning is so much cooler than not spinning
I can hear them spinning from here
