Examples of 'spray rate' in a sentence
Meaning of "spray rate"
spray rate: this phrase is used in the context of agriculture or pest control to refer to the amount of pesticide or spray applied per unit area or time period
How to use "spray rate" in a sentence
Basic
Advanced
spray rate
The spray rate was increased during processing.
This is attributed to the changed spray rate.
Spray rate was increased as processing progressed.
The gradation can also influence the spray rate needed.
The spray rate is increased compared to the first embodiment.
This would provide a relatively high spray rate to this insert.
The maximum spray rate may be defined by the valve used.
The granule size visually appeared larger as the spray rate increased.
The spray rate is increased compared to either of the first or second embodiments.
The greater the number of stem orifices the higher the spray rate.
The spray rate depends on the batch size in the process according to the invention.
Another important property of the aerosol composition is the spray rate during dispensing.
The spray rate was adjusted to allow uniform coating and adequate drying of the coat.
Deposition rate is expressed as the ratio between the spray rate and spray spot square.
Other factors affecting spray rate and size include the proportion of propellant in the formulation.
See also
The film coating can be carried out to the end using this increased spray rate.
The spray rate for spraying API nanosuspension may also influence the fluidized bed coating performance.
Lower polymer concentrations in the API nanosuspension may allow use of a higher spray rate.
Spraying was conducted at a spray rate of 2 ml per minute.
Therefore, the spray rate can be increased to increase efficiency of the coating.
Spraying of the clearcoat paint was conducted at a spray rate of 2 ml per minute.
For example, if the spray rate is too low, proper agglomeration will not be achieved.
As product is dispensed the gas compression reduces, thus lowering the spray rate.
For example, increasing the spray rate is known to increase the average particle size.
The greater the size of the actuator orifice, the greater the spray rate.
The spray rate was raised slowly to a maximum of 2 g / min.
Other parameters include the atomizing air and volume, spray rate and inlet air temperature.
The spray rate is low and it takes 15 minutes to apply this much slurry.
Note, We recommend that you start with the minimum spray rate.
The spray rate for the emulsion was 43-gram/minute through the two substance laboratory spray nozzle.
The seal coat is applied under the following conditions, Spray Rate.
Although intermittently, the spray rate was increased to about 20 ml / min.
Next, the binder solution is sprayed onto the powders at a solution spray rate of 50 g / min.
With the latter spray rate a spraying time from 0.5 s to 4 s will result.
However, considerations such as solution concentration, tackiness, and spray rate may affect the process efficiency.
In a preferred embodiment, the EE calculator / controller 106 calculates a new value for the spray rate.
The coating was applied at a maximum spray rate of about 1.6 kg / min.
You'll also be interested in:
Examples of using Spray
Show more
Do not spray electrical apparatus and wiring
Do not immerse the spray gun in solvent
Do not spray during fog or a temperature inversion
Examples of using Rate
Show more
The mortality rate is certainly on the rise
Rate stations and assign audit points
Low literacy rate and school attendance
